TECHNICAL DATA ENGLISH
8
TYPE BA31EN
PROTECTION CLASS II
OPERATING VOLTAGE 230 V-50 Hz
ABSORBED CURRENT 4,3A
ABSORBED POWER 900 W
ELECTRONIC OVERLOAD PROTECTION YES
ELECTRONIC SPEED CONTROL YES
ROTATION RPM 1.500 ÷ 4.000
DISC PAD DIAMETER mm 115
SPINDLE THREAD M 14
DISC SPINDLE STOP YES
EXTRACTION SYSTEM
YES
WEIGHT kg 1,8
SAFETY AND ACCIDENT PREVENTION INSTRUCTIONS
The safety and accident prevention instructions are reported in
the “SAFETY INSTRUCTION” booklet which forms an integral part
of these documents; the operating instructions indicate the addi-
tional information required specifically for use of the tool. Never
use the tools without the safety guards. Any operations carried
out on the tool must be effected with the power supply disconnec-
ted. Before starting the tool, ensure that it is held tightly and not in
contact with the work surface. The tool must always be used with
the protective shield mounted. The abrasive wheel must be cor-
rectly mounted and tightened. Make sure that the sparks caused
during work do not create danger by hitting people or inflamma-
ble substances. Hazardous dust may form during use regulation
safety devices for personal protection and observe safety norms
valid for the processed work material. During tool use pieces of
the wheel of work material may break off causing serious injuries
to people or things: remember to always use all personal protec-
tion devices (such as gloves, headphones, goggles, etc.) accor-
ding to laws in force to prevent or reduce accident probability.
Warning: the appliance continues to work for a few seconds after
it has been switched off!
SPECIFIC USE
Before use make sure that the wheels or cutters operating charac-
teristics are compatible with those of the machine and that they
are not broken or worn. Make sure that the wheels or cutters are
assembled, handled and stored with care according to the manu-
facturer's indications. Do not use and adapter system for cutters
with tangs other than those specified. Do not use the wheel cut-
ting edge as grinder. Make sure the work piece is sufficiently fa-
stened. In the event of improper use, the user is fully liable for any
damages or accidents.
8
GENERAL WARNINGS
The tool must be connected to a suitable dust extraction system (not supplied).
