6
4 Setup
1
Position speakers
For best stereo reproduction, place left and right
speakers no less than 60cm (24in) apart with
the speaker with volume control on the right.
Avoid having objects in front of the speakers and
also ensure the underside of each speaker is
unobstructed.
2 Connect speakers together
Connect the two speakers with the interconnect
cable (5), inserting one end into the output (13) on the
right speaker and the other end into the input socket
on the left speaker.
3 Connect to AC power
Connect the AC power cord (4) into the power
adapter (3). Connect the power adaptor lead (3) to
the DC power socket (14) and then insert the mains
plug on the AC power cord (4) into a mains outlet.
CAUTION: do not plug the AC power cord into the
mains until all other connections are made.
4 Turn on your speakers
When you connect the speakers to mains power
they will power up in standby mode. To turn them on,
press the control knob (8) on the right speaker or the
standby button (18) on the remote; the source status
indicator (9) glows solid amber showing that Line-in
audio input is selected.
5 Adjust volume
Turn the volume control knob (8) clockwise to
increase the volume, anticlockwise to decrease it or
use the volume buttons (21) on the remote. When you
reach the maximum or minimum volume, the status
indicator (9) goes off temporarily.
6 Standby
Press and release (short press) the control knob (8)or
press the standby button (18) on the remote.
