•
The appliance must be unplugged:
- before cleaning and maintenance procedures.
-
if it is not working correctly.
-
as soon as you have finished using it.
- if you leave the room, even momentarily.
•
Do not use if the cord is damaged.
• Do not immerse or put under running water, even for cleaning purposes.
•
Do not hold with damp hands.
•
Do not hold the appliance by the casing, which is hot, but by the handle.
•
Do not unplug by pulling on the cord, rather pull out by the plug.
•
Do not use an electrical extension lead.
• Do not clean with abrasive or corrosive products.
• Do not use at temperatures below 0°C and above 35°C.
GUARANTEE : Your appliance is designed for use in the home only. It should not be used for
professional purposes. The guarantee becomes null and void in the case of improper usage.
4. ADJUSTABLE COMB ATTACHMENT
• Your clippers are supplied with three adjustable comb attachments to suit different hair lengths:
- long hair: 25 - 40 mm.
- short hair: 3 - 9 mm.
These values are purely indicative; the actual cutting length may vary according to the angle at which
the clipper is held.
• To remove or change the comb:
- slide it as shown in figure 6 until it is completely detached. Then insert another comb if required
(Fig. 5).
5. CLEANING
• The clipper requires very little cleaning. You can clean it with a slightly damp cloth. To clean the
adjustable comb attachment, remove it as shown in fig. 6.
• After each use, the cutting blades should be cleaned.
6. LUBRICATION
Maintenance-free, self-lubricating blades!
7. ENVIRONMENTAL PROTECTION
Your appliance contains valuable materials which can be recovered or recycled.
Take it to a local civic waste collection point.
Remove the screw, open the casing, remove the batteries.
8. TROUBLESHOOTING
• The clipper won't start (in cordless operation) or no longer has sufficient autonomy:
Have you recharged it?
GB
