9
1 • Unpacking
Unpack your appliance and remove any labels, keep your
warranty form and read the instructions carefully before
using your appliance for the first time.
2 • Recommendations and
precautions
Unwind the power cord completely before each use. Do not
jam it and do not allow it to rub against sharp edges.
If you are using an electrical extension, check that it is in
perfect condition and that it is suited to the power of your
vacuum cleaner. Do not unplug the appliance by pulling on
the power cord.
Do not move the vacuum cleaner by pulling on the power
cord, the appliance must be moved using its carrying
handle.
Do not use the power cord or the hose to lift the appliance.
Switch off and unplug your vacuum cleaner after each use.
Always switch off and unplug your vacuum cleaner before
maintenance or cleaning.
Your vacuum cleaner is fitted with a safety device which
prevents the motor from overheating. In certain cases (when
used on chairs, sofas, etc.) the safety device may be tripped
and the appliance may make an unusual noise that is not
serious.
Only use original Rowenta accessories and filters.
Check that all the filters are in place.
Do not operate your vacuum cleaner without the
filtration system fitted (foam, microfilter and filter).
Never place the foam and microfilter in the appliance unless
they are completely dry.
If you have any difficulties in finding accessories or filters for
this vacuum cleaner, contact the Rowenta Customer
Service.
BEFORE FIRST USE
1 • Fitting the elements onto the
appliance
Clip the end of the hose to the suction inlet located at the
front of the appliance (fig.1).
To remove, unclip the end
using the clip and remove.
Fix the accessory support to the notch in the parking
position located at the back of the vaccuum cleaner (fig.2)
and store the accessories on top.
Note: The accessory support does not need to be removed
to open the vacuum cleaner lid.
• Fit the metal telescopic tube to the end of the nozzle until
you hear a click indicating that it is locked (fig.3).
To remove,
press the tube lock button and remove.
• Fit the multi-surface nozzle (23) to the end of the metal
telescopic tube until you hear a click indicating that it is
locked (fig.4).
To remove, press the nozzle lock button and
remove.
• Adjust the metal telescopic tube to the desired length
using the telescopic system (TELESCOPIC SYSTEM) (fig.5).
Fit the corresponding accessory to the end of the metal
telescopic tube or the nozzle:
- For rugs and carpets: use the multi-surface nozzle in the
retracted brush nozzle position or the Turbo-brush* (fibres
and animal hairs).
- For parquet and smooth floors: use the multi-surface
nozzle in the brush release position or for best results use
the parquet nozzle*.
- For corners and hard to reach spots: use the telescopic
crevice nozzle*.
- For upholstery and delicate surfaces: use the brush with
the nozzle (EASY BRUSH) or the upholstery nozzle*.
USE
IMPORTANT: always switch off and disconnect your
vacuum cleaner before changing the accessories.
ERGONOMIC RECOMMENDATIONS
ERGO COMFORT SILENCE range
Ergonomic, the ERGO COMFORT SILENCE range
has been designed to facilitate and improve user
comfort when vacuuming.
To prevent bending over and to ensure upright
posture, make sure to:
1. Adjust the length of the ERGO COMFORT
SILENCE metal telescopic tube to your body (fig.6).
2. Place your second hand on the front of the ERGO
COMFORT SILENCE nozzle handle (fig.7).
Accessories
20 Flexible hose with power nozzle ERGO COMFORT
SILENCE (21)
21 a - ERGO COMFORT SILENCE ergonomic nozzle
b - Integrated brush (EASY BRUSH)
c - Manual power switch (POWER CONTROL)
22 ERGO COMFORT SILENCE metal telescopic tube
a - Nozzle/tube locking system (LOCK SYSTEM)
b - Tube adjustment button (TELESCOPIC SYSTEM)
23 ERGO COMFORT SILENCE multi-surface nozzle
a - Nozzle/tube locking system (LOCK SYSTEM)
b - 2-position button: brush retracted for rugs and
carpets/brush released for parquet and smooth floors
24 Telescopic crevice nozzle*
25 Upholstery nozzle*
26 Delta parquet nozzle*
27 Rectangular parquet nozzle*
28 Turbo-brush*
29 Mini turbo-brush*
30 Accessory support*
DESCRIPTION
* According to model: these systems are specific to certain mo-
dels or are accessories available as an option.
EN
