BEFORE USE
1 • Assemble your vacuum
cleaner (fig. 1) - (fig. 2)
2 • Select the right
accessory* (fig. 2)
VACUUMING
3 • Turn on your appliance
(fig. 3) - (fig. 4) - (fig. 5)
4 • Adjust the suction
power* (fig. 6)
Max : floors
Min : furniture, delicate fabrics…
5 • Turn off your appliance
(fig. 7) - (fig. 8)
STORING (fig. 9)
MAINTENANCE
AND CLEANING
6 • Change the dustbag
(ref ZR 0022)
The dustbag full indicator* informs you
that the bag is full or blocked with dust
particles. If the suction is weak, the nozzle is
off the ground and the suction power is on
maximum, change the dustbag. (fig. 10)
(fig. 11) - (fig. 12) - (fig. 13)
7 • Cleaning the motor
protection
(fig. 10) - (fig. 14) - (fig. 15)
(fig. 16)
8 • Replacing the micro-
active filter (ref ZR 0022)
(fig. 17) - (fig. 18) - (fig. 19)
9 • Cleaning your vacuum
clean
Clean the housing of the vacuum cleaner
with a soft and humid cloth and let dry.
(fig. 20)
CAUTION Never turn the appliance on
without a dustbag and filters.
IMPORTANT Always turn off and unplug
your appliance before maintenance or
cleaning.
IMPORTANT
Every 10 changes of the dustbag:
- clean the motor protection foam filter with
warm, soapy water (using a gentle
detergent). Rinse and leave to dry before
putting back into place.
CAUTION The motor protection foam
filter should always be in place during use.
IMPORTANT Do not use strong,
inflammable or abrasive cleaning products.
* According to model
11
IMPORTANT
Every 10 changes of the dustbag:
- replace the micro-active filter.
GB
