- Press both release buttons (E) and lift up the shaving head (fig 1)
- Open the shaving head by moving the blade release button (D) on the shaving head (fig 4.)
- Press both release buttons (E) and lift up the shaving head (fig 1)
- Open the shaving head by moving the blade release button (D) on the shaving head (fig 4.)
- Rinse the foil mesh and the cutting unit under running water (fig 14).
Remove remaining hair with the brush. Let the shaver dry before closing the shaving head.
- The housing may be wiped down using a damp cloth with a little washing-up liquid.
- Replace the head on the shaver by pushing it into the upper part of the housing and then
pressing it into the housing until it clicks (fig 2&3).
RINSING THE BIKINI HEAD (RF7360)
- Stop and unplug the appliance.
- Remove the bikini head by pressing the release buttons on the shaving head (E) and pulling
the head gently upwards (fig 12).
- You can then put the bikini head under gently running cold water for 5 to 10 seconds .
- Shake the bikini head briskly then dry it with a towel.
- Replace the head on the shaver by pushing it into the upper part of the housing and then
pressing it into the housing until it clicks (fig 2&3).
WASHING THE COMBS AND BIKINI ACCESSORY
- Put them under gently running cold water then dry them with a soft cloth before
storing.
8. IN THE EVENT OF A PROBLEM
• "Inefficiency of your shaver!":
- Have you thought of stretching your skin during shaving?
- Have you cleaned the shaving head properly? Is it worn?
- Is the shaving head worn? To change it, go to one of our approved service centres.
- Is the cutting head well positioned in its housing?
• "Operating problem!":
- Are the batteries placed in the right direction (RF3330/7360)?
9. MAINTENANCE
Change the batteries
• The appliance has to be equipped with functional batteries.
• If the batteries are not new, keep some spare batteries so you can change them when
needed.
• Open the battery compartment by removing the battery cover from the housing and put in
three alkaline Micro (AAA) batteries (fig 13 .
• Replace the battery cover.
10. ENVIRONMENT PROTECTION FIRST
Your appliance contains valuable materials which can be recovered or recycled.
Leave it at a local civic waste collection point.
43
