Recommendations:
To prime the steam circuit, either before using the iron for the first time, or if you have not used
the steam function for a few minutes, press the steam control button several times in a row,
holding the iron away from your clothes.
This will enable any cold water to be removed from the steam circuit.
• Iron temperature control setting :
- Start with fabrics to be ironed at a low temperature (
•
) and finish with those which need
higher temperatures (
•••
or Max).
- Mixed fibre fabrics : set the ironing temperature to the setting for the most delicate fabric.
- Woollen garments : press repeatedly on the steam control button to obtain short bursts of
steam, without placing the iron on the garment itself.This will avoid making the fabric shiny.
• Steam output control dial setting :
- Thick fabric : increase the steam setting.
- At a low temperature : set the steam output control dial to the low position.
• Dry ironing :
- Do not press the steam control button beneath the iron handle. Do not press the “Precision
Steam Jet” button or humid steam button on the iron handle (according to the model).
• If you are using starch, it should be sprayed onto the reverse side of the fabric to be ironed.
• Ironing board :
For best results a mesh type ironing board should be used to allow any excess steam to escape.
GB
It is recommended that you start with fabrics to be ironed at a low
temperature: synthetics (
•
).
To obtain steam, press on the steam control button beneath the iron
handle and keep it pressed (8).The steam will stop when you release
the button.
For delicate fabrics (
•
), press the steam control button
(under the handle of the iron) intermittently to avoid possible
water droplets appearing with the steam.
6 • WHENTHE RED LIGHT «WATERTANK EMPTY»
COMES ON
There is no more steam.The removable water tank is empty (9).
1. Remove the water tank and fill it up.
2. Ensure the water tank is replaced securely and press the boiler
“Restart” button located on the control panel to continue your
ironing.
(8)
(9)