371208
29
Verklein
Vergroot
Pagina terug
1/39
Pagina verder
29
English
3. Press the MEMORY button. ENTER THE
NUMBER OF SPEAKERS scrolls in the dis-
play followed by 5 SPEAKERS, indicating
the default setting for a five speaker system.
4. Use the CONTROL
buttons on the front
panel to adjust the number of speakers to
match your system.
5 SPEAKERS: Select when you have front
speakers, surround speakers, and a cen-
ter channel speaker.
4 SPEAKERS: Select when you have front
speakers, surround speakers, but no cen-
ter channel speaker.
3 SPEAKERS: Select when you have front
speakers, a center channel speaker, but
no surround speakers.
5. Press the MEMORY button. ENTER USE OF
SUBWOOFER scrolls in the display followed
by SUBWFR USE, indicating the default
setting for a subwoofer in the system.
6. Use the CONTROL
buttons on the front
panel to adjust the number of speakers to
match your system.
USE: Select if you have a powered sub-
woofer connected to the system.
NO: Select if you do not have a subwoofer.
7. Press the MEMORY button. ENTER ROOM
SIZE scrolls in the display followed by SMALL
ROOM, indicating the factory default set-
ting for a smaller room.
8. Use the CONTROL
buttons on the front
panel to adjust the number of speakers to
match your system.
SMALL: Select if your listening position
is 8ft (2.4m) from the front speakers and
5 ft (1.5m) from the surround speakers.
MEDIUM: Select if your listening position
is 9ft (2.7m) from the front speakers and
5 ft (1.5m) from the surround speakers.
LARGE: Select if your listening position is
10 ft (3.0m) from the front speakers and
from the surround speakers.
NOTE
: If your room doesn’t match one of these
options, custom settings are available in the
Comprehensive Setup procedure that follows.
8. Press the MEMORY button to complete the
procedure. SETUP END appears briefly in
the display and the RSDX-02 returns to normal
operation with the new settings.
Comprehensive Setup
The Comprehensive Setup provides more
detailed setup procedure for configuring the
RSDX-02 to operate in your system.
Setup Procedure
The Comprehensive Setup uses the front panel
control buttons and the front panel display and
cannot be done from the remote control ex-
cept where noted.
To begin the Comprehensive Setup:
1. Press the SETTING button on the front panel.
The first adjustment item appears in the front
panel display.
2. Use the CONTROL
buttons on the front
panel to step through the available settings
in the Comprehensive Setup procedure,
Each press of a CONTROL
button ad-
vances up or down to the next available
item as shown in the front panel display:
SUBWFR: Subwoofer setting
FRNT SP: Front speaker setting
CNTR SP: Center speaker setting
SURR SP: Surround speaker setting
FRNT D: Front speaker delay
CNTR D: Center speaker delay
SURR D: Surround speaker delay
CROSS: Crossover frequency setting
LFE: Surround Speaker setting
D.COMP: Dolby Digital dynamic range
compensation setting
DGT: Digital input assignment
AUTO SR: Automatic surround mode
QUICK SETUP: Quick Setup procedure
VOUT: Video output configuration
3. Use the CONTROL
buttons on the front
panel to adjust the item currently shown
in the front panel display.
The following topics describe the settings for
each item.
Subwoofer Setting
(SUBWFR)
The SUBWFR item configures the RSDX-02 for
use with or without a powered subwoofer. Use
the CONTROL
buttons to select one of
two settings:
YES: Select this setting if you have con-
nected a powered subwoofer.
NO: Select this setting if your system does
not have a powered subwoofer.
Speaker Settings
(FRNT SP, CNTR SP, SURR SP)
The next three items configure the front speak-
ers, center speaker, and surround speakers
in the system.
For each type of speaker, use the CONTROL
buttons to choose one of three options:
LRG: Select the LARGE setting if the
speaker(s) for this item are capable of re-
producing deep bass.
SML: Select the SMALL setting to redirect
the deep bass from the speaker(s) for this
item to a powered subwoofer or to large
speakers in the system.
NO: Select this setting if you do not have
speaker(s) for this item in the system. For
example, if you do not have surround
speakers, select NO for the SURR SP item.
NOTE
: The NO option is not available for the
front speakers. If you have previously selected
NO for the subwoofer, the front speakers are
automatically set to LARGE.
In the vast majority of systems with a powered
subwoofer, all speakers should be set to SMALL
so that their deep bass is redirected to the
subwoofer. This will almost always result in
better overall bass performance and a system
that will play louder and cleaner, even when
the front speakers are physically large.
Delay Settings
(FRNT D, CNTR D, SURR D)
The next three items set the length of digital
delay for each type of speaker so that the sound
from all speakers arrives at your ear simulta-
neously. Thus, speakers that are closer to you
need longer delay than speakers that are far-
ther away.
The actual delay times are calculated by the
RSDX-02. All you have to do is measure the
distance from your listening position to each
group of speakers and enter the setting here.
There are separate settings for front speakers,
center channel speaker, and surround speakers.
For each type of speaker, use the CON-
TROL
buttons to enter the distance to
the that speaker from your listening posi-
tion (in feet). The range of options is from
1 ft. to 30 ft. in 1 foot increments.
29

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Rotel-rsdx-02

Zoeken resetten

  • Ik krijg geen geluid maar er word aangegeven dat er op headphones wordt afgespeeld terwijl daar niet eens een aansluiting voor is
    Hoe dit op te lossen? Gesteld op 27-9-2014 om 14:00

    Reageer op deze vraag Misbruik melden
  • welke mediaplayer past het beste en kan ik een optische kabel gebruiken voor het geluid Gesteld op 21-12-2010 om 17:28

    Reageer op deze vraag Misbruik melden
    • hallo,
      heeft u hier al een antwoord op? Ik zit met dezelfde vraag, ik heb nu een tvix 6600 met glasvezelkabel maar krijg geen geluid...

      Hoor het graag,
      Sven
      sjvanstijn@hotmail.com Geantwoord op 28-12-2011 om 12:08

      Waardeer dit antwoord Misbruik melden

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Rotel rsdx 02 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Rotel rsdx 02 in de taal/talen: Engels als bijlage per email.

De handleiding is 1,23 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info