To change Zone 2, 3 or 4 volume:
1. Press the front panel SEL or remote REC button repeatedly until the
desired zone status appears in the OSD and front panel displays.
2. Within 10 seconds, adjust the volume control on the front panel or
remote to change the output level for the selected zone. The new
setting appears in the display.
3. Following 10 seconds with no commands, the receiver reverts to
normal operation.
Controlling Zones 2–4 from the Remote Locations AQTU
With a properly configured IR repeater system, you have full control of
Zones 2–4 using the supplied remote control, from the zone locations.
You can select and operate a source, adjust the volume, and turn
the relevant Zone on or off. Whatever commands you send from the
RR-1061 will change ONLY the Zone for the location you are in, just as
if you were controlling a totally independent audio system in that room.
These changes will not affect the main listening room.
To turn the Zone on or off, press the ON/OFF buttons on the remote. To
adjust the volume in the Zone, press the VOLUME buttons on the remote.
To select a different analog input source, press one of the DEVICE/INPUT
buttons on the remote. You can also use the +/– buttons to step through
the source inputs.
All OFF command: A long press of the OFF button (more than 3
seconds) from any room, sets all rooms to standby, i.e., the receiver
goes to standby completely.
Note: The volume adjustment is only available if the Zone 2–4
outputs are configured to use VARIABLE levels. With FIXED levels,
the volume control for Zones 2–4 is disabled.
Note: The RR-1061 remote control can be set to send individual
IR commands for each zone. Please refer to the setup manual
supplied with the RR-1061 to program this function.
SETUP
This Rotel receiver features two types of information displays to help
operate the system. The first consists of simple status displays that
appear on the TV screen and/or front panel display whenever primary
settings (Volume, Input, etc.) are changed. These status displays are self-
explanatory.
A more comprehensive ON-SCREEN DISPLAY (OSD) menu system is
available at any time by pressing the MENU/OSD button on the remote.
These OSD menus guide you through the configuration and setup of the
receiver. In general, the settings made in the configuration process are
memorized as default settings and need not be made again for normal
operation of the unit.
The OSD menus can be configured to display several different
languages. The default English version of all the menus is shown at the
front of this manual. If your language is available, those menus will be
shown in the following instructions. If you would like to change from the
default English language before proceeding, go to the instructions for the
OTHER OPTIONS menu later in this manual. From this menu, you can
change the language display.
Menu Basics
Navigation Buttons ST
The following remote control buttons are used to navigate the OSD menu
system:
MENU/OSD button: Press to display the SYSTEM STATUS screen. From
the SYSTEM STATUS screen, press the ENTER button to display the MAIN
MENU screen which has links to all other menus. If a menu is already
visible, push this button to cancel the display. The MENU button on the
front panel provides the same function.
DOWN/UP Buttons: Press to move up and down in the lists of menu
items that appear on the OSD screens.
+/– Buttons: Press to change the current settings for a selected menu
item on OSD screens.
ENTER Button: From the SYSTEM STATUS screen, press ENTER to
display the MAIN MENU screen. From any other OSD screen, press
ENTER to confirm a setting and return to the MAIN menu.
