803562
14
Verklein
Vergroot
Pagina terug
1/36
Pagina verder
EN
Key functions
MODE: press it to select functions. Hold it for
3 seconds to reset time, distance and calories.
OPERATUION PROCEDURES:
AUTO ON/OFF:
The system turns on when any key is pressed
or when it receives an signal input from the
speed sensor.
The system turns o automatically when
the sensor has no signal input or no key are
pressed for approximately 4 minutes.
RESET: The unit can be reset by either chan-
ging the battery or pressing the mode key for
3 seconds.
MODE: To choose the SCAN or LOCK if you do
not want the scan mode, press the MODE key
when the pointer on the function you want
which begins blinking.
FUNCTIONS:
SCAN: Display changes according to the next
diagram every 4 seconds. TIME - SPEED - DIS-
TANCE - CALORIE - ODOMETER - PULSE
TIME: Press the MODE key until pointer lock
in to TIME. The total working time will be
shown when starting exercise.
SPEED: Press the MODE key until pointer lock
on to SPEED. Display current speed during
working time.
DISTANCE: Press the MODE key until pointer
lock on to DISTANCE. The distance of each
workout will be displayed when starting
exercise.
CALORIE: Press the MODE key until pointer
lock on to CALORIE. The calorie burned will
be displayed when starting exercise.
ODOMETER: Press the MODE key until pointer
lock on to ODO (Total distance) Automatically
accumulates workout distance when starting
exercise.
PULSE: Please press the MODE key until poin-
ter lock on to the” PULSE” function. Through
the heart rate sensor, measuring the number
of beats per minute.
Battery
This monitor uses two type AA batteries. If
improper display on monitor, please reinstall
the batteries to have a good result.
Maintenance
Verify that all the bolts and nuts are locked
properly and the turning parts should be
turned freely without damaged parts.
Clean the equipment with soap and slightly
damp cloth only. Please do not use any sol-
vent to clean the equipment.
Malfunctions and treatment
Base is unstable. Floor is not at or there is
small object under the front or rear stabilizer.
Remove the object. The rear stabilizer end
caps have not been leveled when assem-
bling. Adjust the rear stabilizer end caps.
Handlebar or seat cushion is shaking. Tighten
the bolts and saddle post knob.
Loud noise from the moving parts. The
interval of the parts is improperly tightened.
Open the covers to adjust.
No resistance while using the equipment.
The interval of the magnetic resistance
increases. Open the covers to adjust.
Tension control is damaged. Change the
tension control.
Running belt slips. Open the covers to adjust.
The bearing set is damaged. Change the
bearing set.
14

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Rossler 021092 Cluster crosstrainer bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Rossler 021092 Cluster crosstrainer in de taal/talen: Nederlands, Engels, Frans als bijlage per email.

De handleiding is 4.65 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info