714264
27
Verklein
Vergroot
Pagina terug
1/32
Pagina verder
27
Stopping the appliance
Pay attention during operation that both collection containers and the strainer do not
overflow.
Press the START/PAUSE button to stop the appliance.
The pilot lamp flashes slowly in red.
The appliance can be restarted by pressing the START/PAUSE button again.
NOTE: If the appliance is not restarted within 5 minutes after switching
off, it is switched off automatically.
Switching the appliance off
If the material has been processed and hopper and screw conveyor are
empty, the appliance switches of automatically.
The pilot lamp flashes slowly in red.
Press the ON/OFF button to switch off the appliance.
NOTE: If you do not switch off the appliance within 5 minutes by pressing
the ON/OFF button, it switches off automatically, as soon as there is not
enough material in the screw conveyor.
Unplug the appliance after each use to switch it off permanently!
C.) Clearing a screw conveyor blockage
It is possible that material which is too large, too hard or too moist blocks, jams or gets stuck in the
screw conveyor during processing. If there is a blockage in the screw conveyor, it stops automatically.
If the outlet of the seed container is blocked due to material which is too large, the screw conveyor is
still running. However, no oil or oil press cake is produced.
To clear a blockage in the outlet of the seed container, unplug the appliance and tilt it. Fill the material
to be pressed in a suitable container. Crush the pieces which are too large before you press them again.
In case of a blockage in the screw conveyor, press the Reverse function
button for at least 5 seconds. The appliance starts and the screw conveyor
turns now anticlockwise. The blockage is possibly cleared. Keep the button
pressed during operation. Do not worry if the appliance causes loud
creaking noises. This is harmless.
The pilot lamp flashes quickly in green.
If you release the ON/OFF button, the appliance stops again.
Then, you can start the appliance by pressing START/PAUSE to check
whether the blockage is cleared.
If the blockage cannot be cleared this way, unplug the appliance and
remove the material to be pressed as described above. Open then the
screw conveyor casing, disassemble the screw conveyor and clean it.
Examine the material for foreign matters (see section on “Disassembling
and assembling the appliance”).
If the blockage is cleared, you can continue processing.
27

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Rommelsbacher OP700 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Rommelsbacher OP700 in de taal/talen: Duits, Engels als bijlage per email.

De handleiding is 2,94 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info