40
Step 32:
Continue rinsing the system by
turning the rotary knob to the right.
Dispense ca. 1/3 of the water.
Step 33:
Stop the supply.
Turn the rotary knob to the top.
NOTE: The appliance carries excess
water back into the water tank via a
UHFLUFXODWLRQV\VWHP
Step 34:
Remove the collecting vessel.
Trouble shooting
Ě 7KHULJKWFRDUVHQHVVRIWKHFRIIHHHVSUHVVREHDQLVLPSRUWDQW,IWKHFRDUVHQHVVLVúQHUPRUHûDYRXUZLOOEH
extracted. If the setting is too fine, the contact time of hot water will be too long and too many bittern will be
extracted. And also the crema clears away again.
Ě 9DU\LQJWKHFRPSDFWLQJSUHVVXUHRIWKHSRZGHULQWKHSRUWDúOWHUVKRZVVLPLODUHIIHFWVDVYDU\LQJWKHFRDUVHQHVV
Taste is not okay?
Finding Possible cause
bitter taste
beans ground too fine, beans compressed too much, percolation is too long, too
much powder, too much pressure
sour taste
no suitable water, water is too soft, brewing temperature is too low, beans
ground too coarse, roasting is too light, percolation is too short, wrong coffee
type (coffee roasting instead of espresso roasting)
off-flavour
bad bean quality, beans are stored too long, chlorinated water, wrong espresso
type
not enough flavour
not enough powder, coffee is too old, powder is too coarse, powder is not
compressed enough, too much water
Step 30:
Stop the supply.
Turn the rotary knob to the top.
NOTE: The appliance carries excess
water back into the water tank via a
UHFLUFXODWLRQV\VWHP
Step 31:
Place a vessel below the outlet of
the hot water/steam nozzle.
Step 29:
For rinsing the system, turn the
rotary knob to the left. Dispense 2/3
of the water.
Check the collecting vessel regularly,
empty it if necessary.
Please refer to
“Cleaning and maintenance”
for further information.
Step 35:
If the appliance is not needed any
more, switch it off and pull the
mains plug.
Step 36:
Clean the appliance and the
accessories.
Insert the filter cartridge again and
bleed the system.
