30
Step 12:
Stop hot water supply.
Turn the rotary knob to the top.
NOTE: The appliance carries excess
water back into the water tank via a
UHFLUFXODWLRQV\VWHP
Repeat step 11 + 12
3 times.
Step 13:
If the appliance is not needed any
more, switch it off and pull the
mains plug.
Refilling the water tank
Ě $YRLGWKDWWKHZDWHUWDQNLVGUDLQHGFRPSOHWHO\GXULQJXVH:HUHFRPPHQGFKHFNLQJWKHZDWHUOHYHOSULRUWRHDFK
XVHDQGUHúOOLQJZDWHUXSWRWKHĐ0$;đPDUNLQJ
Ě 7KHSXPSJHQHUDWHVDORXGSXPSQRLVHLQFDVHWKHZDWHULQWKHWDQNUXQVORZ
Ě )RUUHúOOLQJWKHZDWHUWDQNWKHUHLVQRQHHGWRWDNHRXWWKHZDWHUúOWHU
Ě $IWHUUHúOOLQJWKHZDWHUWDQNEOHHGWKHV\VWHPLIQHFHVVDU\
Warning: Casing, brew head,
portafilter, filter inserts and hot
water/steam nozzle are getting hot
GXULQJXVH
Step 2:
Fill the water tank with fresh tap
ZDWHUXSWRWKHĐ0$;đPDUNLQJ
Step 3:
Insert the water tank.
Make sure the water tank is inserted
as far as it will go on the gasket.
Step 4: (bleeding)
Position the portafilter without filter
insert at the marking of the brew
head and lock it by turning it to the
right as far as it will go.
Step 5: (bleeding)
Place a vessel below the outlet of
the hot water/steam nozzle.
Step 6: (bleeding)
Choose the function
“espresso/hot water”.
Step 7: (bleeding)
Switch the appliance on.
The operation pilot lamp glows
permanently.
The appliance heats up and the
red temperature pilot lamp glows
permanently.
When the lamp extinguishes, the
appliance is ready for use.
Step 1:
Remove the water tank
(previously remove the portafilter if
necessary).
Empty residual water.
Ě &KHFNWKHZDWHUWDQN
regularly, refill water if
necessary.
Ě &KHFNWKHYHVVHOUHJXODUO\
empty it if necessary.
Ě 7KLVSURFHVVPD\FDXVHORXG
pump noises.