713982
23
Verklein
Vergroot
Pagina terug
1/28
Pagina verder
23
current running period of the timer is shown.
While the timekeeper continues counting in OFF mode, the respective timer LED is glowing permanent-
ly. This shows that the value on the 7-segment display relates to the timer, whereas it cannot be directly
altered at that stage. To this end, the control must first be reactivated using the ON/OFF sensor.
A timer LED permanently glowing during active mode shows that the timer of the respective cooking
zone has been programmed and is counting down, whereas the time is not being indicated on the
7-segment display.
Provided there is no further adjustment made within 10 seconds after activation of the timer (the
display keeps indicating “00”), the display as well as the allocation of the PLUS/MINUS sensors change
back automatically into the power level setting mode. If no cooking zone is activated, the control chan-
ges immediately into the OFF mode after the 10-second period.
Setting the timer value (running period)
Having activated a timer, the belonging LED is blinking as described. The requested countdown period
of the timer (running period) can then be set using the PLUS/MINUS sensors.
Starting with the PLUS sensor, the first value indicated is skipped to “01” and is increasing by single
steps to a maximum of “99” (= final maximum power level setting) with every further activation.
Starting with the MINUS sensor, the indicated value is skipped to “30” and is decreasing by single
steps down to “01” (initial minimum power level setting; when reached, a signal tone is heard) with
every further touch of the sensor. In order to attain the value “00”, the MINUS sensor must be released
and activated anew. Further activation of the MINUS sensor will not alter the “00” indication (= final
minimum power level setting).
When activating the sensors permanently, the setting speed is automatically accelerated, i. e., the time
required from one step to another is reducing as long as the sensor is being activated.
When the PLUS or MINUS sensors are not activated within 10 seconds subject to cooking zone related
programming, the indicator and the allocation of the PLUS/MINUS sensors automatically change back
to the power level setting. When using a timer as a timekeeper, the indicator and the sensor allocation
do not change back to the power level setting, as it must not be activated for the duration of that
period.
Timer settings take priority over the operating time limitation subject to high power level settings (refer
to table on “operating time limitation”).
When nothing but a timekeeper has been programmed, the control maintains the wait mode first (with
no other cooking zones being activated). Provided there is no input of new values, the control proceeds
as described and changes into OFF mode.
Timer countdown
For the last 10 seconds of the timer countdown the indicator always adapts itself to the timer and
counts down the seconds.
When the countdown of the time is completed, there is an audible signal and the respective cooking
zone is deactivated. Thereafter, the indications “00” and “H” (if residual heat is prevailing) appear
alternately, while the belonging timer LED is blinking in addition.
After a maximum of 2 minutes or by activating any sensor, the signalling is stopped.
Interrupting the timer / Altering the timer value (running period)
The setting value of a timer can be altered at any time after its activation or in timekeeping mode using
the PLUS or MINUS sensor.
A timer can be deactivated by adjusting the setting to “00” using the MINUS sensor. Also, it can be
immediately reset to “00” by activating both the PLUS and the MINUS sensor simultaneously.
23

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Rommelsbacher EBC3477TC bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Rommelsbacher EBC3477TC in de taal/talen: Duits, Engels als bijlage per email.

De handleiding is 1,25 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info