713982
20
Verklein
Vergroot
Pagina terug
1/28
Pagina verder
20
Cooking with your built-in hob
ON/OFF sensor [1] (main switch)
Use the ON/OFF sensor to activate as well as to deactivate the control of the cooktop.
Activating the control
The Touch Control electronics of the built-in hob is activated by touching the ON/OFF switch [1] and
changes from OFF mode into wait mode. To this end, the ON/OFF sensor must be activated for 1 second.
There will be a short buzzer signal in acknowledgement.
In wait mode both power level setting indicators will permanently show “0.”. This indication might
possibly shift into the background, depending on the cooktop’s status in terms of residual heat and
possible errors.
In addition to the figure, the decimal point in the bottom right-hand corner next to the respective right-
hand cooking zone indicators will be glowing permanently during both wait and active mode.
When a cooking zone is activated within the 10-second wait mode period, the control switches over to
active mode. Provided there is no further input within a period of 10 seconds after switch-on, the control
will automatically switch back to OFF mode, accompanied by an audible signal.
Deactivating the control
Both wait and active mode allow for the control to be deactivated at any time using the ON/OFF sensor.
This deactivation mode always takes priority during operation, regardless of other sensors being activated
simultaneously or the key lock having been activated.
PLUS/MINUS sensors [3]/[4] and [6]/[7]
Use the PLUS/MINUS sensors to switch the cooking zones on and off as
well as to adjust the requested power level setting or running period of
the timer.
Activating a cooking zone (cooking)
In either wait or active mode a cooking zone can be directly activated via the belonging PLUS/MINUS
sensors ([3]/[4] for the large cooking zone, or [6]/[7] for the small cooking zone) unless the cooking zone is
in timekeeping mode (refer to „timer“ section for more details).
Setting the power level
When starting with a PLUS sensor, the power level setting is skipped from “0.” to “4.”. When starting with
a MINUS sensor, the power level setting is skipped from “0.” to “9.”. Further activation of a PLUS sensor
raises the power level setting for the pertaining cooking zone. Analogously, further activation of a MINUS
sensor reduces the power level setting.
Continuous activation of a sensor automatically raises or reduces the power level setting at 0.5-second
intervals. Having reached the maximum power level setting, the power level setting is maintained (final
power level setting) regardless of any continuous activation. This final power level setting is not cancelled
until the respective sensor is briefly released and then re-activated. Such is required for selecting the
automatic cooking function.
Automatic temperature system
Your cooktop comes equipped with an automatic temperature system, i. e., the respective temperature is
kept constant by energy being supplied in cycles. That cycling can be observed by watching the heating
20

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Rommelsbacher EBC3477TC bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Rommelsbacher EBC3477TC in de taal/talen: Duits, Engels als bijlage per email.

De handleiding is 1,25 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info