> Cause the difference of the capacity and data storage for the TF Card, the camera needs a few seconds to ready,
so please wait for the prompt of the vibrates.
> For the product video resolution is HD 720P, please use the brand high-speed (CLASS6) TF card to avoid the
recording effect reducing or no operation.
Note: The blue indicator flashes quickly when turns on without TF Card. Please turn off and insert TF card again.
2. Mode transfer
When it turns on, press the mode transfer key short, it will circle in 4 modes:
Mode1: Manual video recording standby mode, blue indicator will be constantly on
Mode2: Manual photo taking standby mode, red indicator will be constantly on
Mode3: Motion-detect video recoding standby mode, blue and yellow indicator are (motion-detect start)
constantly on together.
Mode4: Motion-detect photo taking, red and yellow (motion-detect) indicator are constantly on together.
Note:
1、The camera will shake once after press the key which indicates that the key is in effect, if the status indicator is
not changed immediately, please don't press it again, the camera is saving data. It is a normal situation, please
have a little patience
2、When it is transferred to other modes from motion-detect mode, the reaction will be faster if you shut out the
lens.
3. Video Recording
In the manual video recording mode, press the execute key shortly, the camera will shake once, and blue indicator
flashes slowly and the camera begins to record video. Press the key again, the camera will shake once and blue
indicator will be constantly on, stop to record.
Note:
1、 The unit can last video recording for 20 minutes every time and save the video automatically, and then records
next video.
2、Please open the waterproof plug for better audio recording effect when not use it underwater.
3、When the TF Card was fully loaded, battery used up or stop operated for 3 minutes, it will shut down
automatically.
4. Photo Taking
In the manual photo taking standby mode, press the execute key, then please keep the camera still until it vibrates,
a photo has been taken after vibration stops.
Note:
1、The red indicator will goes out when it is taking photo, please keep it still for better photographing quality!
2、When the TF Card was fully loaded, battery used up or stop operated for 3 minutes, it will shut down
automatically.
5. Motion-detect video recording
> When the camera captures mobile objects, it will record video for 10 seconds, 1min, 5mins, 10mins (depends on
system setting) and save the video automatically, then it record next video and loop recording.
