Mid-Side Delay
This eect applies dierent amounts of delay to left/right signals of similar phase and
diering phase.
L in L out
R outR in Side
Mid
LR
/
MS
MS
/
LR
Multi-Tap
Delay
Multi-Tap
Delay
Parameter Value Explanation
M Delay Level 0–127 Delay volume of left/right input signals whose phase is
similar (in phase)
M Delay Mode 2Tap, 3Tap, 4Tap Delay divisions for the input signals whose left/right phase
is similar (identical phase)
M Delay Time (sync sw) OFF, ON Synchronize to the tempo of the DAW if this is ON.
M Delay Time (msec) 1–1300 [msec]
Adjusts the delay time from the direct sound until the delay
sound is heard.
M Delay Time (note) Note
& “Note”
M Delay 1 Feedback -98–+98 [%]
Adjusts the proportion of the delay sound that is fed back
into the eect.
Negative (-) settings will invert the phase.
M HF Damp
200, 250, 315, 400, 500,
630, 800, 1000, 1250,
1600, 2000, 2500, 3150,
4000, 5000, 6300, 8000,
BYPASS [Hz]
Adjusts the frequency above which sound fed back to the
eect is ltered out. If you don’t want to lter out any high
frequencies, set this parameter to BYPASS.
M Delay 1 Pan
L64–63R
Panning of the rst delay sound
M Delay 2 Pan Panning of the second delay sound
M Delay 3 Pan Panning of the third delay sound
M Delay 4 Pan Panning of the fourth delay sound
S Delay Level 0–127 Delay volume of left/right input signals whose phase is
distant (opposite phase)
S Delay Mode 2Tap, 3Tap, 4Tap Delay divisions for the input signals whose left/right phase
is distant (reverse phase)
S Delay Time (sync sw) OFF, ON Synchronize to the tempo of the DAW if this is ON.
S Delay Time (msec) 1–1300 [msec]
Adjusts the delay time from the direct sound until the delay
sound is heard.
S Delay Time (note) Note
& “Note”
S Delay 1 Feedback -98–+98 [%]
Adjusts the proportion of the delay sound that is fed back
into the eect.
Negative (-) settings will invert the phase.
S HF Damp
200, 250, 315, 400, 500,
630, 800, 1000, 1250,
1600, 2000, 2500, 3150,
4000, 5000, 6300, 8000,
BYPASS [Hz]
Adjusts the frequency above which sound fed back to the
eect is ltered out. If you don’t want to lter out any high
frequencies, set this parameter to BYPASS.
S Delay 1 Pan
L64–63R
Panning of the rst delay sound
S Delay 2 Pan Panning of the second delay sound
S Delay 3 Pan Panning of the third delay sound
S Delay 4 Pan Panning of the fourth delay sound
Level 0–127 Output Level
