757755
21
Verklein
Vergroot
Pagina terug
1/111
Pagina verder
to Contents
PRO EDIT parameters (INST COMMON)
Category
0–21 Selects the Insts category.
Level
0–127 Adjusts the volume of the Inst.
Source Key
0–127
Species the pitch in semitone steps
relative to 60 (the original pitch of the
instrument).
Fine Tune
-50–+50 [cent] Adjusts the pitch of the sound up or
down in 1-cent steps (+/-50 cents).
Random Pitch Depth
0–1200 [cent]
Species the width in which the pitch is
randomly changed each time the note
is sounded. If you do not want the pitch
to change randomly, set this to “0.
Assign Type
Sets the way sounds are played when the same key is
pressed a number of times.
MULTI
Layer the sound of the same keys.
Even with continuous sounds where
the sound plays for an extended time,
such as with crash cymbals, the sounds
are layered, without previously played
sounds being eliminated.
SINGLE
Only one sound can be played at a time
when the same key is pressed.
With continuous sounds where the
sound plays for an extended time, the
previous sound is stopped when the
following sound is played.
Envelope Mode
NO-SUS,
SUSTAIN
When a loop waveform is selected, the
sound will normally continue as long
as the key is pressed. If you want the
sound to decay naturally even if the key
remains pressed, set this to “NO-SUS.
* If a one-shot type Wave is selected, it
will not sustain even if this parameter
is set to “SUSTAIN.
WMT Velocity Control
OFF, ON,
RANDOM
Determines whether a dierent wave is
played (ON) or not (OFF) depending on
the force with which the key is played.
When set to “RANDOM, the tones
constituent wave will sound randomly,
regardless of any velocity messages.
Tempo Sync
OFF, ON
Matches the wave playback to the
tempo. This is valid only if a wave with
a specied BPM is selected. If this
function is enabled, parameters related
to pitch and FXM are ignored.
PRO EDIT parameters (INST WAVE)
Each instrument consists of four waves (WAVE 1–4).
You can edit the following parameters for each wave.
Switch
OFF, ON Turns the corresponding wave on/o.
Wave L/R
(Wave number)
Species the wave number within the
group specied by Wave Group.
Click this to open the Wave Browser.
You can use bank and category to
narrow the search results, or use
keyword search to select a wave.
If using mono, specify only the left side
(L). If using stereo, specify the right side
(R) as well.
If using mono, specify only Wave L and
leave Wave R at 0: OFF.
If you specify only Wave R, no sound is
heard.
Gain
-18–+12 [dB]
Species the gain (amplitude) of the
waveform.
The value will change in 6 dB (decibel)
steps.
Each 6 dB increase doubles the gain.
FXM Switch
OFF, ON
This sets whether FXM will be used (ON)
or not (OFF).
* FXM (Frequency Cross Modulation)
uses a specied waveform to apply
frequency modulation to the currently
selected waveform, creating complex
overtones. This is useful for creating
dramatic sounds or sound eects.
FXM Color
1–4
Species how FXM will perform
frequency modulation. Higher settings
result in a grainier sound, while lower
settings result in a more metallic sound.
FXM Depth
0–16 Species the depth of the modulation
produced by FXM.
Coarse Tune
-48–+48
Adjusts the pitch of each waves sound
up or down in semitone steps (+/-4
octaves).
MEMOMEMO
The Coarse Tune of the entire drum
partial is set by the “Source Key.
Fine Tune
-50–+50
Adjusts the pitch of each Waves sound
up or down in 1-cent steps (+/-50
cents).
* One cent is 1/100th of a semitone.
MEMOMEMO
The Fine Tune of the entire drum partial
is set by the “Fine Tune Oset.
Level
0–127
Adjusts the level of each Wave.
MEMOMEMO
The volume level of each drum partial
is set with the Partial Level; the volume
levels of the entire drum kit is set with
the “Level.
Pan
L64–63R
This species the pan of the waveform.
“L64” is far left, “0” is center, and “63R is
far right.
Random Pan Sw
OFF, ON
Use this setting to cause the waveforms
panning to change randomly each time
a key is pressed (ON) or not (OFF).
* The range of the panning change is
set by the “Random Pan Depth.
Alternate Pan Sw
OFF, ON, REVS
This setting causes panning of the
waveform to be alternated between left
and right each time a key is pressed.
Set this to ON to pan the Wave
according to the Alternate Pan Depth
settings, or to “REVS when you want
the panning reversed.
If you do not want the panning to
change each time a key is pressed, set
this to “OFF.
21

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Roland Zenology bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Roland Zenology in de taal/talen: Engels als bijlage per email.

De handleiding is 29,01 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info