Handleiding Roland XV-2020 (pagina 47 van 169) (Engels)

647722

Verklein

Vergroot

Pagina terug

1/169

Pagina verder

Creating a Patch

ANALOG FEEL

(Analog Feel Depth)

0–127 Specifies the depth of Analog Feel that is applied to the Patch. Traditional ana-

log synthesizers often exhibited a degree of instability in their tuning. The XV-

2020’s Analog Feel feature can simulate this characteristic.

CLOCK SOURCE

(Patch Clock Source)

PATCH, SYSTEM Selects the timing reference to be used by the Patch. The LFO cycle, M-FX

changes, phrase loop (break beats), and Tone delay time can be synchronized

to a clock, or tempo.

PATCH: Uses the Patch Tempo.

SYSTEM: Uses the global System Tempo or clock messages received from an

external sequencer.

TEMPO

(Patch Tempo)

20–250 Establishes the Patch’s tempo when Clock Source is set to “PATCH.”

* Clock messages for the Patch Tempo are not transmitted from the MIDI OUT con-

nector.

CUTOFF OFFSET -63–+63 Simultaneously lowers or raises the individual TVF cutoff frequency values of

the Tones in the Patch.

RES OFFSET

(Resonance Offset)

-63–+63 Simultaneously lowers or raises the individual TVF Resonance values of the

Tones in the Patch.

ATTACK TIME OFFSET -63–+63 Simultaneously lowers or raises the individual TVA ENVELOPE T1 values of

the Tones in the Patch.

RELEASE TIME OFFSET -63–+63 Simultaneously lowers or raises the individual TVA ENVELOPE T4 values of

the Tones in the Patch.

VELOCITY SENS OFFSET -63–+63 Simultaneously lowers or raises the individual TVF VELOCITY V-Cutoff and

TVA V-Sens values of the Tones in the Patch.

PRIORITY

(Voice Priority)

LAST, LOUDEST Determines how notes are managed when the XV-2020’s maximum polyphony

limit is exceeded (64 voices).

LAST: Gives priority to the last-played voices. Currently-sounding notes are

turned off in order, beginning with the first-played note.

LOUDEST: Gives priority to the voices with the loudest volume. Currently-

sounding notes are turned off beginning with the lowest-volume voice.

MONO/POLY

(Key Mode Assign)

MONO, POLY Sets how the Patch’s notes are played. The MONO setting is effective when

playing a solo instrument Patch such as sax or flute.

MONO: Only one note sounds at a time

POLY: Two or more notes can be played simultaneously.

LEGATO SW

(Legato Switch)

OFF, ON Turn this parameter on when you want to use the Legato feature and off when

you don’t. Legato is a function that works only when the Key Assign Mode is

MONO. When Legato is ON, pressing one key when another is already pressed

causes the currently playing note’s pitch to change to that of the newly pressed

key while continuing to sound. This can be effective when you wish to simulate

performance techniques such as a guitarist’s hammering on and pulling off

strings.

LEGATO RETRIGGER OFF, ON The setting determines whether sounds are replayed or not when performing

legato. Normally you will leave this parameter “ON.” When Delay Key follow

is set to OFF, if one key is pressed while another key is held down, only the

pitch changes, which with some waveforms may result in an unnatural sound.

Set this to “OFF” when performing wind and string phrases or when using

modulation with the mono synth keyboard sound.

* If the Legato Switch is “OFF,” this setting is ignored.

PITCH BEND RANGE UP 0–48 Specifies the pitch change that occurs when the Pitch Bend lever is moved fully

to the right (or up on some MIDI controllers).

PITCH BEND RANGE DOWN -48–0 Specifies the amount of pitch change that’s applied to the Patch’s pitch when

the Pitch Bend lever is moved fully left (or down on some MIDI controllers).

PORTAMENTO SW

(Portamento Switch)

OFF, ON Portamento is a function that causes the Patch’s pitch to change smoothly from

one note to the next note played. When the Key Mode Assign is MONO, this

can be effective in simulating performance techniques such as a violinist’s glis-

sando. Turn this switch on when you wish to use.

PORTAMENTO MODE NORMAL, LEGATO Chooses the way in which Portamento is applied.

NORMAL: Portamento is always applied.

LEGATO: Portamento is applied only for notes played legato (i.e., when you

press a second key before releasing the first.)

PORTAMENTO TYPE RATE, TIME Determines the way in which the pitch difference between the two notes affects

the time it takes to glide from one note to the next.

RATE: The time it takes depends on the distance between the two pitches.

TIME: The time it takes is constant, regardless of how far apart in pitch the

notes are.

Parameter Value Description

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

lees eerst de handleiding door;
controleer of uw vraag al eerder door iemand anders is gesteld;
probeer uw vraag zo duidelijk mogelijk te stellen;
heeft u een probleem en al geprobeerd om dit op te lossen, vermeld dit erbij aub;
heeft u een oplossing gekregen van een bezoeker dan horen wij dat graag in dit forum;
wilt u een reactie geven op een vraag of antwoord, gebruik dan niet dit formulier maar klik op de knop 'reageer op deze vraag';
uw vraag wordt direct op de website gezet; vermijd daarom persoonlijke gegevens in te vullen;

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Roland XV-2020 Handleiding

Hulp nodig? Stel uw vraag in het forum

Misbruik melden

Product:

Spelregels forum

Abonneren

Ontvang uw handleiding per email

Stel vragen via chat aan uw handleiding

Uw handleiding is per email verstuurd. Controleer uw email

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

U heeft geen emailadres opgegeven

Uw vraag is op deze pagina toegevoegd

Info