647744
68
Verklein
Vergroot
Pagina terug
1/216
Pagina verder
68
Chapter 3. Creating Your Own Sounds
Storing a Sound You Modify
into User Memory
The modified settings you make are only temporary, and will
be lost if you turn the power off or select another Patch,
Performance or Rhythm Set. To keep the modified settings,
you must write them into user memory.
1. In Patch mode (when storing a Patch), Performance
mode (when storing a Performance) or in Rhythm Set
mode (when storing a Rhythm Set), press [UTIL/CARD].
The UTIL 1 display will appear.
fig.3-20
2. Use [ ] or [ ] to make 1: WRITE blink. Then press
[ENTER].
The WRITE display will appear.
fig.3-21.e
3. Use the VALUE dial, [INC]/[DEC] or numeric keys to
specify the Patch, Performance or Rhythm Set number of
the destination of writing.
4. Press [ENTER].
If Internal Write Protect is turned off, the specified writing
destination Patch, Performance or Rhythm Set will be
overwritten.
5. If Internal Write Protect (p. 121) is turned on, the
following display will appear. Change the ON setting to
OFF, and press [ENTER]. Internal Write Protect will be
turned off, and you will return to the display of step 2.
Press [ENTER] once again and the selected Patch will be
overwritten.
fig.3-22
* Internal Write Protect is automatically turned ON when the
XP-30’s power is turned on.
Functions of Patch Parameters
fig.3-05
Settings Common to the Entire
Patch (COMMON)
On this display you can assign a name to a Patch and set the
volume and pan of the entire Patch.
PATCH NAME
You can assign a name of up to 12 characters to the Patch.
* For details on assigning names, refer to “Assigning a Name”
(p. 46).
PATCH CATEGORY
Category
Specify the type (category) of the Patch.
The Patch Search function uses this setting. This setting also
determines the phrase that will be sounded by the Phrase
Preview function.
* For details on the category names, refer to p. 49.
PATCH CLOCK
Some parameters allow you to set a time value in terms of a
note length which is determined by a tempo setting or tempo
source you specify; Rate parameters (PATCH/ LFO/ LFO1,
2), Time parameter (PATCH/WAVE/TONE DELAY), and
some Multi-Effects parameters. This Patch Clock setting sets
the tempo which can be used by these parameters.
* When using a Patch in Performance mode, the setting of this
parameter will be ignored, and the setting of the PERFORM
CLOCK display (PERFORM/COMMON) will be used instead.
Source (Patch Clock Source)
Select the source of the Patch Clock.
PATCH: Synchronize to the Patch Tempo setting.
SYSTEM: Synchronize to the tempo clock of the sequencer.
* The Patch Clock does not transmit clock messages from MIDI
OUT connector.
Tempo (Patch Tempo)
Set the Patch Tempo setting.
* When Source (Patch Clock Source) is set to SYSTEM,
synchronization will be according to the tempo clock of the
system, so it will not be possible to set the tempo value. The
tempo of the system will be displayed in parentheses ( ).
PATCH COMMON
Level
Adjust the volume level of the Patch.
Writing destination
68

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Roland XP-30 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Roland XP-30 in de taal/talen: Engels als bijlage per email.

De handleiding is 5,26 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info