647744
63
Verklein
Vergroot
Pagina terug
1/216
Pagina verder
63
Chapter 3. Creating Your Own Sounds
Chapter 3
1. Press [PATCH] to access the PATCH PLAY display, and
select the Patch whose settings you wish to modify (p.
47).
2. Press [EDIT] to make the indicator light.
3. Use the function buttons to select the display group.
The button indicator of the selected display group will blink.
fig.3-05
4. Use [ ] or [ ] to select a display page.
5. If you have selected a parameter display that can be set
independently for each Tone, the number of the Tone
selected for editing will be shown in the display. To
select a different Tone, press [EDIT] to temporarily turn
off the indicator, and use TONE SELECT [1][4] (located
in the row of function buttons) to select a Part.
fig.3-06
For simultaneously modifying the same parameter for two or
more Tones, hold down one of TONE SELECT [1][4]
buttons and press another TONE SELECT [1][4] button,
then another if so desired. An asterisk (*) will be indicated for
Tones other than the first-selected Tone.
* To switch Tones on/off, turn off [EDIT] indicator and then use
the TONE SWITCH [1]–[4] located in the row of function
buttons.
6. Use [ ] or [ ] to move the cursor to the parameter
you wish to modify.
7. Use the VALUE dial, [INC]/[DEC] or numeric keys and
modify the parameter value.
* If you’ve selected two or more Tones, your editing will modify
the parameter values for all selected Tones by the same amount.
* If you’ve made a mistake in setting the parameter value or you
don’t like the changes, just press [UNDO/COMPARE] to
restore the value to what it was.
8. If you wish to move to another display group, press
[EDIT] to make the indicator light, and use the function
buttons.
* You can also move to another display group by holding down
[SHIFT] and using [ ] or [ ]. Since this can be done even
when [EDIT] indicator is dark, it is a faster way to get around
because you don’t have to turn on [EDIT] indicator each time.
9. Repeat steps 38 to complete a Patch.
10. When you finish making settings, press [EXIT] or
[PATCH] to return to the PATCH PLAY display.
An asterisk (*) will be displayed at the left of the Patch group.
This shows Patch settings have been modified.
fig.3-07
* If you select another Patch in the group with an asterisk (*), the
modified Patch settings will be lost. If you wish to keep these
modified settings, you must write them into user memory (p. 68).
Editing Patches Using the Palette Display
When editing a Tone in a Patch, the parameter values of the
four Tones can be displayed together on a single display called
the
Palette display
. Use it when you want to modify
parameter values as you compare the settings of the four Tones.
1. When modifying a Tone, use [ ] or [ ] to move the
cursor to the parameter you wish to modify.
2. Press [PALETTE EDIT] to call up the Palette display.
fig.3-08
3. Press a TONE SELECT [1][4] buttons, [ ] or [ ] to
choose the Tone to modify.
The button indicator for the selected Tone will light and the
Tone number and Wave name appear in the display.
For modifying the same parameter of two or more Tones
simultaneously, hold down one of TONE SELECT [1][4]
buttons and press another.
4. Use the VALUE dial, [INC]/[DEC] or numeric keys to
change the parameter value.
If youve selected two or more Tones, your editing will
modify the parameter values for all selected Tones by the
same amount.
If you want to set all selected Tones to the same value, select
the Tone having that value by pressing [ ] or [ ] and
while holding down [SHIFT], press [ENTER].
* If you’ve made a mistake in setting the parameter value or you
don’t like the changes, press [UNDO/COMPARE] to restore
the value to what it was.
5. If you wish to edit other parameters, press [ ] or [ ] to
select the parameter that you wish to edit.
6. Repeat steps 35 to complete a Patch.
7. To cancel the palette display, press [PALETTE EDIT] to
make the button indicator go dark.
63

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Roland XP-30 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Roland XP-30 in de taal/talen: Engels als bijlage per email.

De handleiding is 5,26 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info