647744
58
Verklein
Vergroot
Pagina terug
1/216
Pagina verder
58
Chapter 2. Playing
Holding an Arpeggio
If you hold down [ARPEGGIO] and press [TRANSPOSE],
and get the indicator to start blinking, the arpeggio will
continue to be played even if you release the chord.
1. Hold down [ARPEGGIO] and press [TRANSPOSE] to
make the indicator blink.
2. Play a chord.
3. If you play a different chord or notes while the arpeggio
is being held, the arpeggio will change accordingly.
4. To cancel Arpeggio Hold, hold down [ARPEGGIO] and
press [TRANSPOSE] simultaneously once again.
Using a Hold Pedal
If you play an arpeggio while pressing the hold pedal, the
arpeggio will continue to be played even if you release the
chord.
1. Connect an optional pedal switch to the HOLD PEDAL
jack.
2. Play a chord while pressing the hold pedal.
3. To play another chord, release the pedal, press it again as
you play the next chord.
Simulating a Guitar Cutting
Technique
You can simulate a guitar cutting technique by following the
procedure below. By using the Sound Palette, it is also
possible to apply a wah effect as you play.
1. Select a guitar Patch.
2. Set the Style parameter (SYSTEM/ARPEGGIO/
ARPEGGIO) to RHYTHM GTR B, RHYTHM GTR C,
RHYTHM GTR D or RHYTHM GTR E.
3. Press [FILTER/ENV] so the indicator lights.
4. Move the CUTOFF slider or RESO slider while you play
a chord.
Playing an Arpeggio from an
External MIDI Device
The XP-30 can also produce arpeggios with incoming Note
messages from an external MIDI device.
1. Connect the XP-30s MIDI IN connector and the MIDI
OUT connector of an external MIDI device with a MIDI
cable.
2. Press [PERFORM] to call up the PERFORM PLAY
display.
3. Press [SYSTEM] to make the indicator lit, press the
[MIDI] function button, and then press [ ] to access the
PERFORM MIDI display.
fig.2-19
4. Use the cursor buttons to move the cursor to the Remote
parameter.
5. Rotate the VALUE dial or press [INC]/[DEC] to turn the
setting ON.
6. Play the external MIDI device.
Creating an Arpeggio Pattern
There are a total of 9 parameters that can be set for the
Arpeggiator, but the most important is the Style parameter
setting. The arpeggio pattern is largely determined by this
setting.
When you set the Style parameter, the Motif, Beat Pattern,
Accent Rate and Shuffle Rate parameters will automatically
be set to optimum settings. After selecting the style, you can
also set Octave Range and Key Velocity parameters, etc.
If this selection does not provide the pattern you want,
modify the settings of the Motif, Beat Pattern, Accent Rate
and Shuffle Rate parameters to add variations to the style as
desired.
* Motif, Beat Pattern, Accent Rate and Shuffle Rate settings will
be lost if you select another style and then turn the power off.
* The values you can set with the Motif or Beat Pattern
parameters are normally limited by the selected style. Only
when the Style parameter is set to LIMITLESS will all values be
acceptable.
58

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Roland XP-30 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Roland XP-30 in de taal/talen: Engels als bijlage per email.

De handleiding is 5,26 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info