527444
127
Verklein
Vergroot
Pagina terug
1/140
Pagina verder
Troubleshooting
(continued)
127
Advanced UsesRecording Listening Deleting Creating a CD Editing an SD Appendices
Convenient
Functions
Information
/ Display
Checking /
Preparations
Problems with the Sound
(continued)
Problem
Cause and Action
See
Page
The sound recorded via
the internal mics is not
loud enough
Have you adjusted the input level of the internal mics?
Turn the [MIC] knob to raise the input level of the internal mics.
42
The recorded sound is
noisy or distorted
Is the input level adjusted appropriately?
Noise can tend to be become more noticeable if the sound being input
is at a relatively low level. On the other hand, distortion can crop up
when the level is high. Try to always keep the input level adjusted to a
setting that’s appropriately matched to the volume of the sound you’re
inputting.
If you raise the input level when you’re using the external microphones
with limited sensitivity, any noise from the internal CD drive could
become more noticeable and might be recorded along with your
recording. If you feel dissatisfied with the outcome, try using the
following procedure when recording.
Use batteries to power the unit. (24)
Record to SD memory card. (45, 50, 52)
Use the AC adaptor to power the unit. (22)
Write the song data on the SD memory card to a CD. (95)
Adjust the input level so that the PEAK indicator lights briefly when loud
sounds are input.
42, 46,
50, 52
Could the input level be raised for a jack to which no device is
connected?
Even if no device is connected, we recommend that you turn down the
input level—turn the knob all the way to the left—for everything other
than the audio source you’re recording.
Could MIC SELECT be set to “Internal
?
Even though you thought you were recording using the external mics,
a noisy recording may indicate that you were actually recording through
the internal mics. If you want to record using the external mics, set to
the “External,” “Ext(MONO),” or “Plug-In Power.”
45
Is the output level set correctly?
If you raise the output level too high, noise or distortion may occur in
the sound from the internal speakers. Turn the [OUTPUT LEVEL] knob to
adjust the volume.
70
Unintended tone quality
Could you have made bass or treble settings?
Set the bass and treble settings to “0.”
72
An unwanted effect is
applied to the sound
Could you have selected a reverb?
Turn the reverb “Off.”
73
Volume changes are not
recorded correctly
according to the actual
performance
Could the [MIC LEVEL] switch be set to the “AUTO” position?
The “AUTO” position is suitable for recording human voices at a
meeting or lecture, and may be unsuitable for recording an instrumental
performance. Change the setting to “MANUAL,” and turn the [MIC]
knob to adjust the input level.
44
CD-2u_SD-2u_e.book 127 ページ 2013年1月24日 木曜日 午前11時34分
127

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Roland SD-2U bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Roland SD-2U in de taal/talen: Engels als bijlage per email.

De handleiding is 11,95 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Roland SD-2U

Roland SD-2U Gebruiksaanwijzing - Nederlands - 142 pagina's

Roland SD-2U Gebruiksaanwijzing - Deutsch - 140 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info