537790
1
Verklein
Vergroot
Pagina terug
1/52
Pagina verder
Español Italiano Français Deutsch EnglishPortuguêsNederlands
Owner’s Manual
Bedienungsanleitung
Guide d’utilisation
Manuale dell'utente
Manual del usuario
Manual do proprietário
Gebruikershandleiding
Thank you, and congratulations on your choice of the Roland MICRO CUBE RX Amplifier.
Before using this unit, carefully read the sections entitled: “USING THE UNIT SAFELY” and “IMPORTANT NOTES” (p. 2; p. 4).
These sections provide important information concerning the proper operation of the unit. Additionally, in order to feel assured that you have gained
a good grasp of every feature provided by your new unit, Owner’s manual should be read in its entirety. The manual should be saved and kept on hand
as a convenient reference.
Main Features
A compact, high-performance guitar amplifier ideal for practicing at home
Equipped with four newly developed 10-cm (4-inch) speakers, this compact 5-watt stereo power amp (2.5 watt + 2.5 watt) delivers a powerful guitar
sound.
Dual power operation with alkaline batteries (6 x AA) or AC adaptor (p. 5)
Dual power operation allows the amplifier to be used anywhere.
An 8-type COSM amp modeling function that reproduces sounds such as the Roland JC-120 (p. 6)
The amp is equipped with modeling for six types of popular guitar amps, including the JC-120, in addtion to an original amp, ACOUSTIC.
Combined with the three-band equalizer, enables finely textured sound creation. Can also be used as a simple PA system using the MIC.
Equipped with the same spacially synthesized chorus as the JC-120 (p. 7)
The amp is equipped with an EFX function that allows you to use four types of effects. In addition to a spacially synthesized chorus that reproduces the
soothing breadth of the JC-120's chorus, EFX also delivers FLANGER, PHASER and TREMOLO effects. The amp is also equipped with
separate basic DELAY/REVERB effects.
RHYTHM GUIDE function makes practical rhythm training easy (p. 9)
Contains preset rhythms from 11 genres (33 patterns) such as ROCK, JAZZ, LATIN and METRONOME. The optional footswitch allows you to operate
the START/STOP and TAP TEMPO controls with your feet while playing.
Tuner function that also supports flat tuning (p. 9)
The amp is equipped with a tuner function that also makes flat tuning possible.
AUX IN allows stereo playback (p. 8)
You can connect a CD/MP3 player to the AUX IN jack and play the music in stereo.
Stereo headphone output supported (p. 8)
The amplifier has a stereo PHONES jack that can also be used as a REC OUT jack.
COSM (Composite Object Sound Modeling) is proprietary Roland modeling technology, which analyzes the way in which sound is affected by
elements such as electronic circuitry, structure, and materials, and combines these elements to reconstruct the desired sound.
Copyright © 2008 ROLAND CORPORATION All rights reserved.
No part of this publication may be reproduced in any form without the written permission of ROLAND CORPORATION.
MCUBE-RX_r_e.book Page 1 Thursday, January 10, 2008 1:41 PM
2
USING THE UNIT SAFELY
Do not attempt to repair the
unit, or replace parts within
it (except when this manual
provides specific instructions
directing you to do so). Refer all
servicing to your retailer, the nearest
Roland Service Center, or an autho-
rized Roland distributor, as listed on
the “Information” page.
........................................................................
Never use or store the unit
in places that are:
Subject to temperature
extremes (e.g., direct
sunlight in an enclosed
vehicle, near a heating duct, on top
of heat-generating equipment);
or are
Damp (e.g., baths, washrooms,
on wet floors); or are
Humid; or are
Exposed to rain; or are
Dusty; or are
Subject to high levels of vibration.
........................................................................
Make sure you always have
the unit placed so it is level
and sure to remain stable.
Never place it on stands that could
wobble, or on inclined surfaces.
........................................................................
Be sure to use only the AC
adaptor supplied with the
unit. Also, make sure the line
voltage at the installation matches the
input voltage specified on the AC
adaptor’s body. Other AC adaptors
may use a different polarity, or be
designed for a different voltage,
so their use could result in damage,
malfunction, or electric shock.
........................................................................
Use only the attached power-
supply cord. Also, the
supplied power cord must not
be used with any other device.
........................................................................
Do not excessively twist or
bend the power cord, nor
place heavy objects on it.
Doing so can damage the cord,
producing severed elements and short
circuits. Damaged cords are fire and
shock hazards!
........................................................................
This unit, either alone or in
combination with an amplifier
and headphones or speakers,
may be capable of producing sound
levels that could cause permanent
hearing loss. Do not operate for a long
period of time at a high volume level,
or at a level that is uncomfortable.
If you experience any hearing loss
or ringing in the ears, you should
immediately stop using the unit,
and consult an audiologist.
........................................................................
Do not allow any objects
(e.g., flammable material,
coins, pins); or liquids of any
kind (water, soft drinks, etc.)
to penetrate the unit.
........................................................................
Immediately turn the power
off, remove the AC adaptor
from the outlet, and request
servicing by your retailer, the nearest
Roland Service Center, or an autho-
rized Roland distributor, as listed on
the “Information” page when:
The AC adaptor, the power-supply
cord, or the plug has been
damaged; or
If smoke or unusual odor occurs
Objects have fallen into, or liquid
has been spilled onto the unit; or
The unit has been exposed to rain
(or otherwise has become wet); or
The unit does not appear to operate
normally or exhibits a marked
change in performance.
........................................................................
In households with small
children, an adult should
provide supervision until the
child is capable of following all the
rules essential for the safe operation
of the unit.
........................................................................
Protect the unit from
strong impact.
(Do not drop it!)
........................................................................
Used for instructions intended to alert
the user to the risk of injury or material
damage should the unit be used
improperly.
* Material damage refers to damage or
other adverse effects caused with
respect to the home and all its
furnishings, as well to domestic
animals or pets.
Used for instructions intended to alert
the user to the risk of death or severe
injury should the unit be used
improperly.
The symbol alerts the user to things that must be
carried out. The specific thing that must be done is
indicated by the design contained within the circle. In
the case of the symbol at left, it means that the power-
cord plug must be unplugged from the outlet.
The symbol alerts the user to important instructions
or warnings.The specific meaning of the symbol is
determined by the design contained within the
triangle. In the case of the symbol at left, it is used for
general cautions, warnings, or alerts to danger.
The symbol alerts the user to items that must never
be carried out (are forbidden). The specific thing that
must not be done is indicated by the design contained
within the circle. In the case of the symbol at left, it
means that the unit must never be disassembled.
MCUBE-RX_r_e.book Page 2 Thursday, January 10, 2008 1:41 PM
3
Do not force the unit’s power-
supply cord to share an outlet
with an unreasonable number
of other devices. Be especially careful
when using extension cords—the total
power used by all devices you have
connected to the extension cord’s
outlet must never exceed the power
rating (watts/amperes) for the
extension cord. Excessive loads can
cause the insulation on the cord to
heat up and eventually melt through.
........................................................................
Before using the unit in
a foreign country, consult
with your retailer, the nearest
Roland Service Center, or an autho-
rized Roland distributor, as listed on
the “Information” page.
........................................................................
Batteries must never be
recharged, heated, taken apart,
or thrown into fire or water.
........................................................................
Never expose batteries to
excessive heat such as
sunshine, fire or the like.
........................................................................
The unit and the AC adaptor
should be located so their
location or position does not
interfere with their proper ventilation.
........................................................................
Always grasp only the plug on
the AC adaptor cord when
plugging into, or unplugging
from, an outlet or this unit.
........................................................................
At regular intervals, you
should unplug the AC adaptor
and clean it by using a dry
cloth to wipe all dust and other
accumulations away from its prongs.
Also, disconnect the power plug from
the power outlet whenever the unit is
to remain unused for an extended
period of time. Any accumulation of
dust between the power plug and the
power outlet can result in poor
insulation and lead to fire.
........................................................................
Try to prevent cords and
cables from becoming
entangled. Also, all cords and
cables should be placed so they are
out of the reach of children.
........................................................................
Never climb on top of, nor
place heavy objects on the
unit.
........................................................................
Never handle the AC adaptor
or its plugs with wet hands
when plugging into, or
unplugging from, an outlet
or this unit.
........................................................................
Before moving the unit,
disconnect the AC adaptor
and all cords coming from
external devices.
........................................................................
Before cleaning the unit, turn
off the power and unplug the
AC adaptor from the outlet
(p. 5).
........................................................................
Whenever you suspect the
possibility of lightning in your
area, disconnect the AC
adaptor from the outlet.
........................................................................
If used improperly, batteries
may explode or leak and
cause damage or injury. In the
interest of safety, please read
and observe the following
precautions (p. 5).
Carefully follow the instal-
lation instructions for batteries, and
make sure you observe the correct
polarity.
Avoid using new batteries together
with used ones. In addition, avoid
mixing different types of batteries.
Remove the batteries whenever the
unit is to remain unused for an
extended period of time.
If a battery has leaked, use a soft
piece of cloth or paper towel to
wipe all remnants of the discharge
from the battery compartment.
Then install new batteries. To avoid
inflammation of the skin, make
sure that none of the battery
discharge gets onto your hands or
skin. Exercise the utmost caution so
that none of the discharge gets near
your eyes. Immediately rinse the
affected area with running water
if any of the discharge has entered
the eyes.
Never keep batteries together with
metallic objects such as ballpoint
pens, necklaces, hairpins, etc.
........................................................................
Used batteries must be
disposed of in compliance
with whatever regulations for
their safe disposal that may be
observed in the region in which
you live.
........................................................................
Should you remove the
grounding terminal screw,
keep it in a safe place out of
children’s reach, so there is no chance
of it being swallowed accidentally.
........................................................................
Do not remove the speaker
grille and speaker by any
means. Speaker not user
replaceable. Shock hazardous
voltages and currents are present
inside the enclosure.
MCUBE-RX_r_e.book Page 3 Thursday, January 10, 2008 1:41 PM
4
IMPORTANT NOTES
Power Supply: Use of Batteries
Do not connect this unit to same electrical outlet that is
being used by an electrical appliance that is controlled
by an inverter (such as a refrigerator, washing machine,
microwave oven, or air conditioner), or that contains
a motor. Depending on the way in which the electrical
appliance is used, power supply noise may cause this unit
to malfunction or may produce audible noise. If it is not
practical to use a separate electrical outlet, connect
a power supply noise filter between this unit and the
electrical outlet.
The AC adaptor will begin to generate heat after long
hours of consecutive use. This is normal, and is not
a cause for concern.
The use of an AC adaptor is recommended as the unit’s
power consumption is relatively high. Should you prefer
to use batteries, please use the alkaline type.
When installing or replacing batteries, always turn off the
power on this unit and disconnect any other devices you
may have connected. This way, you can prevent
malfunction and/or damage to speakers or other devices.
Before connecting this unit to other devices, turn off the
power to all units. This will help prevent malfunctions
and/or damage to speakers or other devices.
Placement
Using the unit near power amplifiers (or other equipment
containing large power transformers) may induce hum.
To alleviate the problem, change the orientation of this
unit; or move it farther away from the source of inter-
ference.
This device may interfere with radio and television
reception. Do not use this device in the vicinity of such
receivers.
Noise may be produced if wireless communications
devices, such as cell phones, are operated in the vicinity of
this unit. Such noise could occur when receiving or initi-
ating a call, or while conversing. Should you experience
such problems, you should relocate such wireless devices
so they are at a greater distance from this unit, or switch
them off.
Do not expose the unit to direct sunlight, place it near
devices that radiate heat, leave it inside an enclosed
vehicle, or otherwise subject it to temperature extremes.
Also, do not allow lighting devices that normally are used
while their light source is very close to the unit (such as
a piano light), or powerful spotlights to shine upon the
same area of the unit for extended periods of time.
Excessive heat can deform or discolor the unit.
When moved from one location to another where the
temperature and/or humidity is very different, water
droplets (condensation) may form inside the unit. Damage
or malfunction may result if you attempt to use the unit in
this condition. Therefore, before using the unit, you must
allow it to stand for several hours, until the condensation
has completely evaporated.
Do not allow rubber, vinyl, or similar materials to remain
on the unit for long periods of time. Such objects can
discolor or otherwise harmfully affect the finish.
Do not paste stickers, decals, or the like to this instrument.
Peeling such matter off the instrument may damage the
exterior finish.
Depending on the material and temperature of the surface
on which you place the unit, its rubber feet may discolor
or mar the surface.
You can place a piece of felt or cloth under the rubber feet
to prevent this from happening. If you do so, please make
sure that the unit will not slip or move accidentally.
Maintenance
For everyday cleaning wipe the unit with a soft, dry cloth
or one that has been slightly dampened with water.
To remove stubborn dirt, use a cloth impregnated with
a mild, non-abrasive detergent. Afterwards, be sure
to wipe the unit thoroughly with a soft, dry cloth.
Never use benzine, thinners, alcohol or solvents of any
kind, to avoid the possibility of discoloration and/or
deformation.
Additional Precautions
Use a reasonable amount of care when using the unit’s
buttons, sliders, or other controls; and when using its jacks
and connectors. Rough handling can lead to malfunctions.
When connecting/disconnecting all cables, grasp the
connector itself—never pull on the cable. This way you
will avoid causing shorts, or damage to the cable’s internal
elements.
To avoid disturbing your neighbors, try to keep the unit’s
volume at reasonable levels. You may prefer to use
headphones, so you do not need to be concerned about
those around you (especially when it is late at night).
When you need to transport the unit, package it in the box
(including padding) that it came in, if possible. Otherwise,
you will need to use equivalent packaging materials.
Some connection cables contain resistors. Do not use
cables that incorporate resistors for connecting to this unit.
The use of such cables can cause the sound level to be
extremely low, or impossible to hear. For information on
cable specifications, contact the manufacturer of the cable.
MCUBE-RX_r_e.book Page 4 Thursday, January 10, 2008 1:41 PM
Español Italiano Français Deutsch EnglishPortuguêsNederlands
5
Power Supply
Remove the lid of the battery
compartment and insert 6 AA
batteries, making sure that they are
correctly oriented.
* To avoid malfunction and/or
damage to speakers or other
devices, always turn off the
power on this unit and
disconnect any other devices when installing or replacing batteries.
* When closing the lid of the battery compartment, first insert the
catches on the lid into the matching cavities, then push the lid down
firmly until you hear a click.
Using Batteries
Please note the following points.
If there are batteries in the unit while an AC adaptor is being used,
normal operation will continue should the supply of current
be interrupted (power outage or power cord disconnection).
Use only alkaline batteries (LR6). You cannot use any other type of battery.
Battery Life
Used continuously at maximum power: approx. 13 hours
(These figures will vary depending on the actual conditions of use)
When operating on battery power only, the unit's power indicator (p. 6)
will become dim when battery power gets too low. Replace the batteries
as soon as possible.
Sounds may distort easily or may cut off when played at high
volume as the battery power begins to fade, but this is normal
and does not indicate a malfunction. Either replace the batteries
or use the AC adaptor included with the unit.
1. Insert the DC plug of the supplied AC adaptor into the unit's AC
adaptor jack.
By anchoring the AC adaptor cord using the
cord hook, as shown in the illustration, you
can prevent situations such as the adaptor
becoming unplugged or unreasonable
pressure being exerted on the AC adaptor
jack.
* To avoid faulty operation or damage to the
speakers, you should disconnect the unit from other devices and
switch off its power when connecting the AC adaptor.
2. Connect the supplied power cord to the AC adaptor, and plug
it into an AC outlet.
Place the AC adaptor so the side with the indicator (see illustration)
faces upwards.
* The indicator will light when you plug the AC adaptor into an AC outlet.
Using the Unit With the AC Adaptor
Please note the following points.
Although the unit can operate on batteries alone, connecting the AC
adaptor to the unit while it has batteries inserted ensures that power
is supplied from the AC adaptor, reducing battery consumption.
Use only the AC adaptor included with the MICRO CUBE RX.
Use of other AC adaptors may damage the amp or result in other problems.
Once the connections have been completed, turn on power to your various
devices in the order specified. By turning on devices in the wrong order, you
risk causing malfunction and/or damage to speakers and other devices.
1. Make sure that all volume controls on the MICRO CUBE RX
and connected devices are set to 0.
2. Turn on all the devices connected to the MICRO CUBE RX's INPUT
jack and AUX IN jack.
3. Turn on the MICRO CUBE RX.
4. Adjust the volume levels for the devices.
5. Before switching off the power, lower the volume on each
of the devices in your system, and then turn off the devices
in the reverse of the order followed when switching them on.
NOTE
Due to a circuitry protection feature, this unit requires a few moments
after power up before it is ready for normal operation. To avoid
sudden, high-volume sound, always make sure to have the volume
level turned down before switching on power.
NOTE
Even with the volume all the way down, you may still hear some
sound when the power is switched on and off, but this is normal,
and does not indicate a malfunction.
Attach the supplied strap to
the strap pin as shown in the
illustration.
NOTE
Attach the strap securely so that it does not easily become
detached. If the strap is loose, and you use it that way when
carrying the MICRO CUBE RX, the amp could be dropped,
possibly resulting in damage or injury.
NOTE
Use only the provided strap. The included strap is meant for
exclusive use with the MICRO CUBE RX. Do not use this strap
for other products.
NOTE
Do not spin or swing the MICRO CUBE RX while holding it by
the strap. This is extremely dangerous, as it may cause the strap
to become detached; or, if the motion is repeated enough, may
even break the strap.
Inserting Batteries
Connecting the AC Adaptor
Indicator
AC Outlet
AC Adaptor
Power Cord
Switching the Power On
and Off
Attaching the Strap
MCUBE-RX_r_e.book Page 5 Thursday, January 10, 2008 1:41 PM
6
Panel Descriptions
fig.01-01
1. INPUT Jack
Connect your guitar or microphone here.
2. BOOST Button
Press the BOOST button to change the amp tone. The effects
that you can create vary according to the amp type.
3. TUNER
In addition to manual tuning, in which strings are specified,
you can also use it as a chromatic tuner.
It also supports flat tuning.
Using the Tuner Function (p. 9)
4. AMP TYPE Knob
You can select from eight COSM amp types. When the TUNER
function is on, you can specify a string (note name).
* The product names mentioned in this document are trademarks
or registered trademarks of their respective owners, and are not
related to Roland Corporation. In this manual, these names are
used because it is the most practical way of describing the sounds
that are simulated using COSM technology.
ACOUSTIC SIM
This is an original amp type that includes an acoustic simulator.
Turns the sounds from your electric guitar into a clear, refined
acoustic guitar sound.
Using this type together with a single coil pickup provides optimum
sound quality. Slightly turning down the equalizer's BASS and
MIDDLE settings is effective if you are using a humbucking pickup.
JC CLEAN
This is a model of Roland's famous JC-120 Jazz Chorus guitar amplifier.
The ultra-clean, ultra-flat sound offers a smooth feel. This becomes more
effective when used in combination with an effects device.
BLACK PANEL
This is modeled on the classic Fender Twin Reverb amplifier. It can
be used in a wide variety of musical styles, from country to blues,
jazz, and rock. It exhibits rich lows and a bright high end.
BRIT COMBO
This is modeled on the VOX AC-30TB. This is the rock amplifier that
created the Liverpool sound of the '60s. It can produce a broad
range of sounds, from clean to overdrive.
CLASSIC STACK
This is modeled on the sound and response of a Marshall JMP1987.
Used extensively in hard rock during the 1970s, this is truly the
perfect amp for the "top rock" guitar sound.
METAL STACK
This is modeled on the PEAVEY EVH5150. This is a high-gain amp
type, so even at low volumes, you can still get heavy distortion and
sustain.
R-FIER STACK
This is modeled on the MESA/Boogie Rectifier. This super-high-gain
amp is capable of producing slash metal, grunge, and a wide range
of other lead sounds.
MIC
Select this when a microphone is connected.
* Please note the following points when using a microphone.
Feedback could be produced depending on the location of
microphones relative to the unit. This can be remedied by:
1. Changing the orientation of the microphone(s).
2. Relocating microphone(s) at a greater distance
from the unit.
3. Lowering volume levels.
The sound will be distorted if you turn the GAIN knob up
too high. Set the GAIN knob to as high a value as possible
before the sound distorts to get the best signal-to-noise ratio.
Use a dynamic microphone. You cannot use a condenser
microphone or a plug-in powered microphone that requires
a power supply.
Control Panel
Guitar
Dynamic Mic
Standard
Mono Cable
MCUBE-RX_r_e.book Page 6 Thursday, January 10, 2008 1:41 PM
Español Italiano Français Deutsch EnglishPortuguêsNederlands
7
Panel Descriptions
5. GAIN Knob
Adjusts the input level. Adjust the input level to suit the signal level of
musical instruments connected to the INPUT jack.
TIP
Using a high GAIN setting allows you to get an overdrive sound.
TIP
Set the GAIN knob to as high a value as possible before the sound
distorts to get the clearest sound.
6. VOLUME Knob
Adjusts the volume of the guitar (microphone).
7. Power Indicator
This indicator lights when the unit is turned on.
* When operating on battery power only, the unit's indicator will
become dim during play when battery power gets too low.
Replace the batteries as soon as possible.
8. POWER Switch
Turns the power on and off.
Switching the Power On and Off (p. 5)
9. EQUALIZER
This is a three-band equalizer. It allow you to adjust the tone of the guitar.
BASS Knob
Adjusts the tone quality of the lower range.
MIDDLE Knob
Adjusts the tone quality of the midrange.
TREBLE Knob
Adjusts the tone quality of the upper range.
10. EFX (Effects) Knob
Turn this knob to CHORUS, FLANGER, PHASER, or TREMOLO
to select the corresponding effect. Turn the knob to adjust the
amount of effect applied.
CHORUS (spacially synthesized chorus)
This uses the same spacially synthesized
chorus as the JC-120 to deliver a broad
sound.
* The chorus effects are designed so
they exhibit the greatest effectiveness when you use the unit's
built-in speakers. Effectiveness may differ when REC OUT/
PHONE are used instead of the built-in speakers.
FLANGER
This creates a flanging effect that creates
a sort of spinning sensation with the sound.
PHASER
This effect adds a variable phase-shifted
signal to the direct sound, giving
the sound a swirling character.
TREMOLO
Tremolo is an effect that creates a cyclic
change in volume.
* Graduations for CHORUS, FLANGER,
PHASER and TREMOLO on the panel
are for reference. Be sure to check the sound as you adjust the effects.
11. DELAY/REVERB Knob
Turn this knob to DELAY or REVERB to switch to that effect.
You can also adjust the amount of effect applied by turning
the knob to the desired position.
DELAY
Turn the knob to adjust the delay effect.
REVERB
Turn the knob to adjust the reverb effect.
* Graduations for DELAY and REVERB
on the panel are for reference. Be sure to
check the sound as you adjust the effects.
12. RHYTHM GUIDE
The unit is equipped with drum/percussion-based rhythm patterns
that are useful for solo practicing. In addition to practicing with your
desired beat, you can also use it as a metronome.
Using the RHYTHM GUIDE (p. 9)
PATTERN Knob
Selects the genre of rhythm pattern.
START/STOP Button
Starts/stops the RHYTHM GUIDE. When you start the RHYTHM
GUIDE, its indicator flashes in tempo with the music.
TAP TEMPO Button
Sets the tempo of the RHYTHM GUIDE. Tap this button two or more times
at the desired tempo and the RHYTHM GUIDE will play at that tempo.
VARIATION Button
Selects the variation of the rhythm pattern. Each genre contains three
types of rhythm variations. Pressing the VARIATION button cycles you
through the available variations; the VARIATION indicator will be unlit,
will light green, or will light red to indicate the change in variation.
VOLUME Knob
Adjusts the volume of the RHYTHM GUIDE.
MCUBE-RX_r_e.book Page 7 Thursday, January 10, 2008 1:41 PM
1

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Roland Micro Cube RX bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Roland Micro Cube RX in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Portugees, Spaans als bijlage per email.

De handleiding is 8,44 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info