Handleiding Roland LX-17 (pagina 26 van 30) (Engels)

674614

Verklein

Vergroot

Pagina terug

1/30

Pagina verder

USING THE UNIT SAFELY

IMPORTANT NOTES

Placement

• Do not allow lighting devices that normally are used

while their light source is very close to the unit (such

as a piano light), or powerful spotlights to shine upon

the same area of the unit for extended periods of time.

Excessive heat can deform or discolor the unit.

• Do not allow objects to remain on top of the keyboard.

This can be the cause of malfunction, such as keys

ceasing to produce sound.

Maintenance

• To clean the unit, use a dry, soft cloth; or one that is

slightly dampened. Try to wipe the entire surface using

an equal amount of strength, moving the cloth along

with the grain of the wood. Rubbing too hard in the

same area can damage the nish.

• The pedal of this unit are made of brass. Brass

eventually darkens as the result of the natural

oxidization process. If the brass becomes tarnished,

polish it using commercially available metal polisher.

Care of the Keyboard

• Do not write on the keyboard with any pen or other

implement, and do not stamp or place any marking on

the instrument. Ink will seep into the surface lines and

become unremovable.

• Do not ax stickers on the keyboard. You may be

unable to remove stickers that use strong adhesives,

and the adhesive may cause discoloration.

• To remove stubborn dirt, use a commercially available

keyboard cleaner that does not contain abrasives. Start

by wiping lightly. If the dirt does not come o, wipe

using gradually increasing amounts of pressure while

taking care not to scratch the keys.

Concerning the Care of the Unit (Mirror Finish)

• The surface of this unit has been polished so as

to create a high-gloss, mirror-like nish. Since this

beautiful nish is as delicate as that of the highest

quality, wood-crafted furniture, it needs to be cared for

at regular intervals. Please make sure to observe the

following when caring for the unit.

• For routine care, gently clean the surface using a soft

cloth or a piano-use feather duster. You must avoid

applying any force, since even the tiniest particles

of sand or grit can produce scratches if you wipe

too hard.

• If the nish loses its luster, use a soft cloth

dampened with some polishing liquid to evenly

wipe the surface of the unit.

• Avoid using detergents or other cleaners, as they can

cause the surface nish to deteriorate. This may lead

to the formation of cracks or other imperfections.

Also, do not use chemically-enhanced cleaning

cloths.

WARNING

Concerning the Auto O function

The power to this unit will be turned o

automatically after a predetermined amount

of time has passed since it was last used for

playing music, or its buttons or controls were

operated (Auto O function). If you do not want the power

to be turned o automatically, disengage the Auto O

function (p. 20).

Use only the supplied AC adaptor and the correct

voltage

Be sure to use only the AC adaptor supplied

with the unit. Also, make sure the line voltage

at the installation matches the input voltage

specied on the AC adaptor’s body. Other AC

adaptors may use a dierent polarity, or be

designed for a dierent voltage, so their use could result in

damage, malfunction, or electric shock.

Use only the supplied power cord

Use only the attached power cord. Also, the

supplied power cord must not be used with

any other device.

CAUTION

Cautions when moving this unit

If you need to move the instrument, take note

of the precautions listed below. At least two

persons are required to safely lift and move

the unit. It should be handled carefully, all

the while keeping it level. Make sure to have a rm grip,

to protect yourself from injury and the instrument from

damage.

• Check to make sure the screws securing the unit to

the stand have not become loose. Fasten them again

securely whenever you notice any loosening.

• Disconnect the power cord.

• Disconnect all cords coming from external devices.

• Raise the adjusters on the stand (p. 5).

• Close the lid.

• Fold down the music stand.

• Precautions concerning the use of polishing agents

• Refer to the instructions that came with the

polishing agent for instructions on its proper use.

• Use only polishing agents that are designed

specically for use on the mirror nishes of pianos.

By using any other product, you risk causing

scratches, deformation, discoloration, etc. To

purchase an appropriate product, please consult the

nearest musical instrument store.

• Use the product only on the portions of this unit that

have a mirror-like nish, and using an even touch,

apply it equally over the entire surface. If you apply

more force in one place over another, you risk losing

some of the luster of the nish.

• Store in a location that is out of the reach of small

children. If accidentally ingested, induce vomiting

immediately. Then, see a doctor to obtain a

diagnosis.

Repairs and Data

• Before sending the unit away for repairs, be sure to

make a backup of the data stored within it; or you may

prefer to write down the needed information. Although

we will do our utmost to preserve the data stored in

your unit when we carry out repairs, in some cases, such

as when the memory section is physically damaged,

restoration of the stored content may be impossible.

Roland assumes no liability concerning the restoration

of any stored content that has been lost.

Additional Precautions

• Note when placing a mobile device such as a

smartphone or tablet on this unit

• Handle your device with care to avoid scratching the

unit or the mobile device.

• To prevent your mobile device from overturning or

falling, do not move the music rest or the cover.

• Any data stored within the unit can be lost as the result

of equipment failure, incorrect operation, etc. To protect

yourself against the irretrievable loss of data, try to

make a habit of creating regular backups of the data

you’ve stored in the unit.

• Roland assumes no liability concerning the restoration

of any stored content that has been lost.

• Never strike or apply strong pressure to the display.

• The sound of keys being struck and vibrations produced

by playing an instrument can be transmitted through a

oor or wall to an unexpected extent. Please take care

not to cause annoyance to others nearby.

• Do not apply undue force to the music stand while it

is in use.

• Do not use connection cables that contain a built-in

resistor.

Using External Memories

• Please observe the following precautions when

handling external memory devices. Also, make sure to

carefully observe all the precautions that were supplied

with the external memory device.

• Do not remove the device while reading/writing is

in progress.

• To prevent damage from static electricity, discharge

all static electricity from your person before

handling the device.

Caution regarding radio frequency emissions

• The following actions may subject you to penalty of law.

• Disassembling or modifying this device.

• Removing the certication label axed to the back

of this device.

Intellectual Property Right

• It is forbidden by law to make an audio recording,

video recording, copy or revision of a third party’s

copyrighted work (musical work, video work, broadcast,

live performance, or other work), whether in whole or in

part, and distribute, sell, lease, perform, or broadcast it

without the permission of the copyright owner.

• Do not use this product for purposes that could

infringe on a copyright held by a third party. We

assume no responsibility whatsoever with regard to any

infringements of third-party copyrights arising through

your use of this product.

• The copyright of content in this product (the sound

waveform data, style data, accompaniment patterns,

phrase data, audio loops and image data) is reserved by

Roland Corporation.

• Purchasers of this product are permitted to utilize said

content (except song data such as Demo Songs) for

the creating, performing, recording and distributing

original musical works.

• Purchasers of this product are NOT permitted to extract

said content in original or modied form, for the purpose

of distributing recorded medium of said content or

making them available on a computer network.

• This product contains eCROS integrated software

platform of eSOL Co.,Ltd. eCROS is a trademark of eSOL

Co., Ltd. in Japan.

• The Bluetooth® word mark and logos are registered

trademarks owned by Bluetooth SIG, Inc. and any use

of such marks by Roland is under license.

• This Product uses the Source Code of μT-Kernel under

T-License 2.0 granted by the T-Engine Forum (www.

tron.org).

• Roland, SuperNATURAL, BOSS are either registered

trademarks or trademarks of Roland Corporation in the

United States and/or other countries.

• Company names and product names appearing in this

document are registered trademarks or trademarks of

their respective owners.

• This product is using the Jansson (http://www.digip.

org/jansson/) source code.

org> Released under the MIT license http://opensource.

org/licenses/mit-license.php

CAUTION

Take care so as not to get ngers pinched

When handling the following moving parts,

take care so as not to get ngers, toes, etc.,

pinched. Whenever a child uses the unit,

an adult should be on hand to provide

supervision and guidance.

• Music rest (p. 4)

• Top lid (p. 4)

• Pedals (p. 5)

Keep small items out of the reach of children

To prevent accidental ingestion of the parts

listed below, always keep them out of the

reach of small children.

• Included Parts

Screws

Roland LX-17 Handleiding

Hulp nodig? Stel uw vraag in het forum

Misbruik melden

Product:

Spelregels forum

Abonneren

Ontvang uw handleiding per email

Stel vragen via chat aan uw handleiding

Andere handleiding(en) van Roland LX-17

Uw handleiding is per email verstuurd. Controleer uw email

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

U heeft geen emailadres opgegeven

Uw vraag is op deze pagina toegevoegd

Info