Handleiding Roland Juno Di (pagina 54 van 136) (Engels)

499471

Verklein

Vergroot

Pagina terug

1/136

Pagina verder

Overview

Broadly speaking, the JUNO-Di consists of a controller section, a sound

generator section, and a song player section.

fig.BasicStruct-e.eps

Controller section

This section consists of a keyboard, pitch bend/modulation lever, the

panel buttons and knobs, D Beam controller, and pedals connected to

the rear panel. The performance information generated when you press/

release a key or press a hold pedal are transmitted as MIDI messages to

the sound generator section and/or an external MIDI device.

Sound generator section

This section produces the sound. It receives MIDI messages from the

controller section, song player section, or an external MIDI device,

generates musical sound according to the MIDI messages that were

received, and outputs the sound from the OUTPUT jacks and PHONES

jack.

Song Player section

The Song Player is used to play back audio files or SMF saved in USB

memory.

It can also play rhythm patterns in a variety of styles.

You can play along on the keyboard accompanied by the song or rhythm

pattern played by the Song Player.

When using the JUNO-Di’s Song Player to play songs, you can

create a “playlist” to specify the order in which songs will play.

To create playlists, you need to use the included “Playlist

Editor.” For details, refer to “Using JUNO-Di Editor/Librarian/

Playlist Editor” (p. 85).

Broadly speaking, there are two ways to play the JUNO-Di. One way is to

play using just a single tone (e.g., the sound of a piano or guitar). The other

way is to play more than one tone simultaneously; for example, by playing

a bass tone with your left hand and a piano tone with your right hand.

Playing a single tone

Use the [RHYTHM]–[SYNTH] tone buttons to select the sound you want to

play.

The sounds are assigned to the tone buttons by category, and there are

further sub-categories beneath each tone button. For example, the

[PIANO] button lets you select both piano sounds and electronic piano

sounds, while the [GUITAR/BASS] button lets you select guitar sounds

and bass sounds. To select a sub-category, press the desired tone button

and then use the [

] [ ] buttons. If user tones have been saved, you

can also use the [

] button to select user tones.

The [RHYTHM] button lets you select rhythm sets that allow you to play

percussion instrument sounds from the keyboard.

You can edit the effect settings and other settings of a tone, and save

your changes for each sound.

Tones you’ve edited can be saved as “user tones” in memory numbers

501 through 628.

Playing more than one tone

To select settings that allow you to play multiple tones, turn the

[PERFORM] button on (lit).

Of the settings that allow you to play multiple tones, the “Split,” “Dual,”

and “Super Layer” settings (explained below) can be turned on using the

[SPLIT] button, [DUAL] button, and [SUPER LAYER] button, respectively.

Use the [PERFORM] button when you want to play multiple tones other

than these.

If you’ve edited the settings or created new settings, you can save them

as “user performances” in memory numbers 501 through 564.

If you saved user performances, you can select them by pressing the

[PERFORM] button and then pressing the [

] button.

Playing different tones with your right and left hands

(Split)

The “Split” function can be used when you want to play different tones

with your right and left hands. For example, you might use this to play a

piano tone with your right hand while playing a bass tone with your left

hand.

First, select the tone that you want to use for your right hand. Then press

the [SPLIT] button; the keyboard will be divided into right-hand and left-

hand zones, allowing you to select and play the tone for your left hand.

The key at which the keyboard is divided into right-hand and left-hand

zones is called the “split point.” You can change and save the split point if

desired.

For more about the Split function, refer to p. 33.

How the JUNO-Di is Organized

Controller Section

(controllers such as keyboard, pitch bend/modulation lever, etc.)

Sound Generator

Section

Playback

Song Player Section

Play

Rhythm Pattern

Song Player

Keyboard Settings for Playing

the JUNO-Di

JUNO-Di_e.book 54 ページ２００９年６月２２日　月曜日　午前９時２３分

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

lees eerst de handleiding door;
controleer of uw vraag al eerder door iemand anders is gesteld;
probeer uw vraag zo duidelijk mogelijk te stellen;
heeft u een probleem en al geprobeerd om dit op te lossen, vermeld dit erbij aub;
heeft u een oplossing gekregen van een bezoeker dan horen wij dat graag in dit forum;
wilt u een reactie geven op een vraag of antwoord, gebruik dan niet dit formulier maar klik op de knop 'reageer op deze vraag';
uw vraag wordt direct op de website gezet; vermijd daarom persoonlijke gegevens in te vullen;

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Roland Juno Di Handleiding

Hulp nodig? Stel uw vraag in het forum

Misbruik melden

Product:

Spelregels forum

Abonneren

Ontvang uw handleiding per email

Stel vragen via chat aan uw handleiding

Uw handleiding is per email verstuurd. Controleer uw email

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

U heeft geen emailadres opgegeven

Uw vraag is op deze pagina toegevoegd

Info