710534
48
Verklein
Vergroot
Pagina terug
1/68
Pagina verder
Various Settings (Function Mode)
Indication Value Explanation
Rec Mode
Selecting the Format for Recording (Recording Mode)
You can choose whether to record as SMF or as audio.
MEMO
You can also switch the recording mode by holding down the [ ] (Rec) button and using the [–] [+] buttons.
SMF SMF parts will be recorded separately. This allows you to re-record just a single part, or to overdub dierent parts.
Audio The recording will be made as audio data. The recorded song can be used in your computer.
DPdl Prt (*1)
Changing How the Pedal Eects Are Applied (Damper Pedal Part)
When you press the damper pedal during Dual play or Split play, the pedal eect is normally applied to both tones, but you can also select the tone
to which the eect is to be applied.
R+L All enabled
R Applied only to the Tone 1 (in dual mode)/Right-hand Tone (in split mode)
L Applied only to the Tone 2 (in dual mode)/Left-hand Tone (in split mode)
CPdl Fnc
Changing How the Pedals Work (Center Pedal)
When you turn on the power, the center pedal functions as the sostenuto pedal (p. 10).
You can change the function of the pedal to a variety of other operations.
SOST Sets function to sostenuto pedal.
PLAY
The pedal will have the same function as the [
] (Play/Stop) button.
LAYR
Pressing the pedal will layer on Tone 2, used for Dual play.
* The Layer function can be applied only when using Dual play.
OCT
Pressing the pedal will layer on a sound one octave higher.
* The Octave function cannot be applied while using Twin Piano, Dual play, or Split play.
LocalCtl
Preventing Doubled Notes When Connected to a Sequencer (Local Control)
When you have a MIDI sequencer connected via USB, set this parameter to Local O.
Since most sequencers have their Thru function turned on, notes you play on the
keyboard may be sounded in duplicate, or get dropped. To prevent this, you can
enable the “Local O setting so that the keyboard and internal sound generator will be
disconnected.
OFF
Local Control is o.
The keyboard and composer are disconnected from the internal sound generator. Playing the keyboard will not produce sound.
ON
Local Control is on.
The keyboard and composer are connected to the internal sound generator.
MIDI Ch (*1)
MIDI Transmit Channel Settings (MIDI Transmit Channel)
This setting species the MIDI channel on which the unit will transmit.
MIDI uses sixteen “MIDI channels, which are numbered 1 through 16. By connecting MIDI devices (USB MIDI) and specifying the appropriate MIDI
channel for each device, you can play or select sounds on those devices.
The unit will receive all sixteen channels (1–16).
OFF, 1–16
SaveSong
Renaming a Song (Save Song)
Here’s how to rename a song you’ve saved (p. 38).
CopySong
Copying a Saved Song (Copy Song)
A song you’ve saved to the internal memory can be copied to the USB ash drive. Alternatively, a song saved to the USB ash drive can be copied to
the internal memory. (p. 40)
Del Song
Deleting a Saved Song (Delete Song)
You can delete a saved song from the internal memory or the USB ash drive. (p. 40)
Format
Initializing the Memory (Format Media)
You can delete all songs from the internal memory or a separately sold USB ash drive. (p. 41)
MIDI
Sequencer
Local Control
Sound Generator
USB MIDI
In
USB MIDI
Out
48
48

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Roland DP90Se bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Roland DP90Se in de taal/talen: Engels als bijlage per email.

De handleiding is 32,29 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info