710389
18
Verklein
Vergroot
Pagina terug
1/24
Pagina verder
18
Menu Operations
Recalling, Editing, and Saving a Scene
A “scene contains settings for mixer, mic, and output. You can save ten
scenes in the DJ-707M unit.
Scene
5 Mixer settings
5 Mic 1–3 settings
5 MASTER OUT settings
5 BOOTH OUT settings
5 ZONE OUT settings
Mic section
Turn each
button on/o
Scene 10
Scene 1
Scene 1
Scene 1
Scene 1
Save
Load
When the unit is shipped from the factory, several scenes are already saved.
You can edit and overwrite these scenes.
Scene Explanation
1: Standard
The same audio as MASTER OUT is output from ZONE OUT.
This allows the same use as a standard DJ controller.
2: Two-Room
Mic audio is not output from ZONE OUT.
This is useful when you want to output only the song audio to a
dierent venue than the main venue.
3: DECK4-ZONE
The deck 4 audio is output only from ZONE OUT, without being mixed
into MASTER OUT or BOOTH OUT.
This is useful when you want to output dierent music to the main
venue and to another venue.
4: MICs-ZONE
The mic audio is output only from ZONE OUT.
This is useful when you want the mic audio to be output from dierent
speakers.
5: SoundBoost
A multi-band compressor is applied to each output.
This makes mixing easier when using TR, etc.
Recalling a Scene (Scene Load)
1. Press the [MENU] button.
2. Turn the [SELECT (ENTER)] knob to select “Scene Load, and
press the knob.
Scene Load
1:Standard <
3. Turn the [SELECT (ENTER)] knob to select the scene that you
want to recall, and press the knob.
A conrmation message appears.
Load Scene?
CANCEL[OK]
If you decide to cancel, use the [SELECT (ENTER)] knob to make “CANCEL
blink, and press the knob.
4. Press the [SELECT (ENTER)] knob.
The selected scene is loaded.
Editing a Scene (Scene Edit)
1. Press the [MENU] button.
2. Turn the [SELECT (ENTER)] knob to select “Scene Edit, and
press the knob.
MENU>SCENE EDIT
Mixer Setting
3. Turn the [SELECT (ENTER)] knob to select the setting that you
want to edit, and press the knob.
Mixer: FX(All)<
FILTER
4. Turn the [SELECT (ENTER)] knob to select the parameter that
you want to edit, and press the knob.
The parameter value blinks.
5. Turn the [SELECT (ENTER)] knob to change the value, and press
the knob.
The value is conrmed.
Parameter Value (Bold: default) / Explanation
Mixer Setting
FX (ALL)
FX (Ch1–4)
FX (ALL) species the same eect for the entire channel mixer.
FX (Ch1–4) individually specify an eect for each channel.
FILTER
Applies a lter.
If you turn the [FILTER/FX] knob toward the right, only
the high-frequency range is heard. If you turn the
knob toward the left, only the low-frequency range
is heard.
DUB ECHO
Adds a delayed sound several times while attenuating
it.
If you turn the [FILTER/FX] knob toward the right,
the echo eect is added only to the high-frequency
range.
If you turn the knob toward the left, the echo eect is
added only to the mid-frequency range.
The farther you turn the knob, the longer the interval
between echoes.
JET
Applies a anger eect.
If you turn the [FILTER/FX] knob toward the right, the
peak varies cyclically.
If you turn the knob toward the left, the peak lowers
according to the knobs position.
NOISE
Adds noise.
If you turn the [FILTER/FX] knob toward the right, the
pitch of the noise rises.
If you turn the knob toward the left, the pitch falls.
REVERB Applies a reverb.
DELAY Applies a delay.
BIT CRUSH
Creates a lo- sound.
If you turn the [FILTER/FX] knob toward the right, only
the high-frequency range is heard. If you turn the
knob toward the left, only the low-frequency range
is heard.
PHASER
Applies a phaser eect.
If you turn the [FILTER/FX] knob toward the right, the
peak varies cyclically. If you turn the knob toward the
left, the peak lowers according to the knobs position.
NOISE2
Adds peaky noise.
If you turn the [FX] knob toward the right, the pitch
of the noise rises. If you turn the knob toward the left,
the pitch falls.
SIDE CHAIN Lowers the level in synchronization with the tempo.
SLICER Slices the sound in synchronization with the tempo.
ROLL Plays the sound repeatedly.
ROLL FILTER Plays the sound repeatedly and applies a lter.
LOOP PITCH Plays the sound repeatedly and modies the pitch.
LOOP FILTER
Plays the sound repeatedly and modies the pitch
and lter.
VINYL SIM Simulates sound heard from an analog record.
Anti.FB
Selects the output that uses anti-feedback for the mic input.
OFF
Anti-feedback is not used.
MASTER
Anti-feedback is applied only to the output sound
from the selected jacks.
BOOTH
ZONE
Mode SERATO, INTERNAL
Selects whether mixing is done in Serato DJ Pro or in
the DJ-707M.
DVS Deck
Species the controller when using DVS.
TURNTABLE Turntable (analog)
CDJ DJ player
18

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Roland DJ-707M bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Roland DJ-707M in de taal/talen: Engels als bijlage per email.

De handleiding is 3,59 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Roland DJ-707M

Roland DJ-707M Gebruiksaanwijzing - Deutsch - 24 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info