Handleiding Roland DJ-505 (pagina 18 van 32) (Engels)

710374

Verklein

Vergroot

Pagina terug

1/32

Pagina verder

Operating the DJ-505

TR-S Operations

You can create rhythm tracks using sounds of the Roland TR-808 rhythm

machine etc.

You can also create patterns using the samples of Serato DJ.

What are instruments?

These are the drum sounds used by the TR-S section.

You can change each instrument to the sound that you prefer.

BD bass drum SD snare drum

CH closed hi-hat OH open hi-hat

LT low tom HC hand clap

RS rim shot RC ride cymbal

What are patterns?

Instrument performance data that you record using TR-REC (step

recording) or INST-REC (realtime recording) is called a “pattern.”

The TR-S section lets you create and save 16 patterns.

Playing, Copying, or Deleting Patterns

Playing patterns

1. Press the [PATTERN] button to make it light.

2. Press a TR-S pad [1]–[16] to select the pattern that you want to

play.

The TR-S pad that you pressed is lit.

5 By holding down a TR-S pad and pressing the TR-S pad whose pattern

you want to play next, you can play back the selected patterns

consecutively.

3. Press the [START/STOP] button.

The pattern starts playing.

5 If you select the next pattern during playback, the TR-S pad that you

pressed blinks.

5 Turning the [VALUE] knob changes the playback tempo (BPM 5.0–800.0).

Holding down the [SHIFT] button and turning the [VALUE] knob changes

the value in steps of 10.

5 By holding down the [SHIFT] button and pressing the mixer section’s

TR/SAMPLER [CUE] button, you can specify the tempo of the pattern

by the interval at which you repeatedly press the TR/SAMPLER [CUE]

button (Tap Tempo function).

Loop-playing a specic step (STEP LOOP)

While a pattern is playing, you can loop-play the selected step.

All instruments played by the selected step will loop-play.

1. Press the [START/STOP] button to play back the pattern.

2. Hold down the [SHIFT] button and press the [SCALE] button to

make it blink rapidly.

3. Press the TR-S pad of the step that you want to loop-play.

The selected step starts playing as a loop. When you take your nger o

of the TR-S pad, pattern playback resumes.

5 If you press the TR-S pad while holding down the [SHIFT] button, the

step continues loop-playback even after you take your nger o of the

TR-S pad (Hold). To cancel Hold, press the TR-S pad.

Changing the groove (SHUFFLE)

You can adjust the shue (the feel of rhythmic bounce).

You can create shue rhythms by adjusting the timing at which

backbeats of the pattern are heard.

1. Press the [SHUFFLE] button to make it blink.

2. Use the [VALUE] knob to adjust the timing of the notes.

Display (Value) Explanation

S-50

–

Higher values delay the timing of the notes correspondingly, and lower

values advance the timing.

Adjusting a pattern’s playback timing forward or backward

(NUDGE)

Here’s how to adjust the nudge setting.

This moves the pattern's playback timing forward or backward, letting

you control the feel of the rhythm.

1. Hold down the [SHIFT] button and press the [SHUFFLE] button

to make it blink rapidly.

2. Use the [VALUE] knob to adjust the timing of the notes.

Display (Value) Explanation

n-24–n 24

Higher values make the note timing earlier; lower values make the note

timing later.

Copying a pattern

1. Press the [PATTERN] button to make it light.

2. Hold down the [SHIFT] button and press one of the TR-S pads

[1]–[16] to select the copy-source pattern.

TR-S pads that you can select as a copy-destination are blinking yellow.

* If you decide to cancel the operation, press the [PATTERN] button or

[TR-REC] button.

3. Press one of the blinking TR-S pads [1]–[16] to select the copy-

destination pattern.

* If you copy a pattern while a pattern is playing, the copy-destination

pattern plays automatically.

Clearing a pattern

1. Press the [PATTERN] button to make it light.

2. Hold down the [CLEAR] button and press the TR-S pad for the

pattern that you want to clear.

The pattern that had been saved in the TR-S pad you pressed is cleared.

Clearing an instrument

You can clear just a specied instrument (sample) from a pattern.

1. Press the [INST] button to make it light.

2. Hold down the [CLEAR] button and press the TR-S pad for the

instrument that you want to clear (one of the [1] (BD)–[8] (RC),

[9] (S1)–[16] (RC) pads).

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

lees eerst de handleiding door;
controleer of uw vraag al eerder door iemand anders is gesteld;
probeer uw vraag zo duidelijk mogelijk te stellen;
heeft u een probleem en al geprobeerd om dit op te lossen, vermeld dit erbij aub;
heeft u een oplossing gekregen van een bezoeker dan horen wij dat graag in dit forum;
wilt u een reactie geven op een vraag of antwoord, gebruik dan niet dit formulier maar klik op de knop 'reageer op deze vraag';
uw vraag wordt direct op de website gezet; vermijd daarom persoonlijke gegevens in te vullen;

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Roland DJ-505 Handleiding

Hulp nodig? Stel uw vraag in het forum

Misbruik melden

Product:

Spelregels forum

Abonneren

Ontvang uw handleiding per email

Stel vragen via chat aan uw handleiding

Andere handleiding(en) van Roland DJ-505

Uw handleiding is per email verstuurd. Controleer uw email

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

U heeft geen emailadres opgegeven

Uw vraag is op deze pagina toegevoegd

Info