Handleiding Roland DJ-505 (pagina 15 van 32) (Engels)

710374

Verklein

Vergroot

Pagina terug

1/32

Pagina verder

Operating the DJ-505

Pattern Operations (PATTERN)

You can press the performance pads to switch TR-S patterns (p. 18).

1. Hold down the [SHIFT] button and press the [TR] button to

make the button light in green.

Pattern mode is selected.

Patterns are assigned to the performance pads as follows.

Pattern

Press the [SHIFT] button to select patterns 9–16.

Pattern

2. Press a performance pad, or hold down the [SHIFT] button and

press a performance pad, to select the pattern that you want

to play.

5 If you had been playing a pattern, the pattern nishes playing; then the

pattern that’s assigned to the performance pad that you pressed starts

playing.

5 By holding down a performance pad and pressing the performance

pad that you want to play next, you can play back the selected

performances consecutively.

TR Velocity Operations

The functionality is the same as in TR mode, but when you press a pad in

the upper row, the volume of the instrument changes depending on how

strongly you press the pad.

1. Press the [TR] button twice to make the button light in orange.

TR velocity mode is selected.

BD SD CH OH

LT HC RS RC

2. Press a performance pad.

You hear the instrument. The volume of the instrument changes

depending on how strongly you press the pad. The stronger you press the

pad, the louder the instrument’s volume.

Serato Sampler Operations (SAMPLER)

You can use the performance pads to play songs (samples) that are loaded

into Serato Sampler’s sample slots.

1. In Serato DJ, click the [Sampler] key to access the Samples

panel.

2. Press the [SAMPLER] button to make it light in magenta.

Sampler mode is selected.

3. Use the PARAMETER [−] [+] buttons to switch the Serato

Sampler’s banks.

The Serato Sampler has four banks (A–D), and each bank has eight slots.

4. Drag and drop songs into the Sampler panel to load a sample

into each slot of the Sampler panel.

The sampler settings and the loaded samples are saved.

* You can also load a sample by using the rotary selector to select a

sample and then pressing a performance pad while holding down the

[SHIFT] button.

5. Press a performance pad.

The sample of the slot that’s assigned to the pad you pressed is played.

Slot 1 Slot 2 Slot 3 Slot 4

Slot 5 Slot 6 Slot 7 Slot 8

* The type of playback changes depending Serato Sampler’s playback

mode. For details, refer to the Serato DJ owner’s manual.

MEMO

If you hold down the [SHIFT] button and press the performance pad,

sample playback stops.

Pitch Play Operations (PITCH PLAY)

The pitch of the loaded song can be changed in semitone steps.

1. Press the [SAMPLER] button twice to make the button light in

green.

Pitch play mode is selected.

2. Press a performance pad to change the pitch.

change

Semitone

down

Pitch is raised in semitone steps

Pitch is lowered in

semitone steps

Velocity Sampler Operations

The functionality is the same as in sampler mode, but when you press a

pad, the sample’s playback volume changes depending on how strongly

you press the pad.

1. Hold down the [SHIFT] button and press the [SAMPLER] button

to make the button light in purple.

Velocity sampler mode is selected.

2. Press a performance pad.

The sample of the slot assigned to the pad you press is played.

The more strongly you press the pad, the louder the sample’s playback

volume.

Slip Operations

If slip is on, the song continues to progress in the background even during

scratch play, loop playback, or hot cue playback.

When you cancel scratch play, loop playback, or hot cue playback, the song

playback resumes from the position to which playback had progressed

until that time.

This allows a variety of DJ performance techniques without stopping the

ow of the song.

1. Press the [SLIP] button to make the button light.

Slip mode is selected.

The button blinks while the song is progressing in the background.

Song Analysis

Song analysis begins when you press the DJ-505’s [LOAD] button to load

a song into a deck, but if you’re using Serato DJ as an oine player (i.e.,

without the DJ-505 being connected), you can analyze songs ahead of

time.

If analysis is nished for a song, the BPM and waveform are displayed

immediately after you load that song into a deck.

For details on how to analyze songs with the oine player, refer to the Serato DJ

owner’s manual.

* Depending on the number of songs, analysis might take some time.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

lees eerst de handleiding door;
controleer of uw vraag al eerder door iemand anders is gesteld;
probeer uw vraag zo duidelijk mogelijk te stellen;
heeft u een probleem en al geprobeerd om dit op te lossen, vermeld dit erbij aub;
heeft u een oplossing gekregen van een bezoeker dan horen wij dat graag in dit forum;
wilt u een reactie geven op een vraag of antwoord, gebruik dan niet dit formulier maar klik op de knop 'reageer op deze vraag';
uw vraag wordt direct op de website gezet; vermijd daarom persoonlijke gegevens in te vullen;

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Roland DJ-505 Handleiding

Hulp nodig? Stel uw vraag in het forum

Misbruik melden

Product:

Spelregels forum

Abonneren

Ontvang uw handleiding per email

Stel vragen via chat aan uw handleiding

Andere handleiding(en) van Roland DJ-505

Uw handleiding is per email verstuurd. Controleer uw email

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

U heeft geen emailadres opgegeven

Uw vraag is op deze pagina toegevoegd

Info