710334

Roland D-05 Handleiding

1
Verklein
Vergroot
Pagina terug
1/2
Pagina verder
English
Owner’s ManualLINEAR SYNTHESIZER
D-05
Copyright © 2017 ROLAND CORPORATION
In order to use this device correctly, please carefully read “USING THE UNIT SAFELY” and “IMPORTANT NOTES” (the Leaet “USING THE UNIT SAFELY) before use.
After reading, keep these instructions at hand for immediate reference.
Introduction
The D-05 is a sound module that can be used in conjunction with the K-25m keyboard unit
(sold separately). The sound can be heard through the built-in speakers.
* The D-05 can operate on batteries or on USB bus power. If you are using batteries, insert four
AA batteries, making sure that the batteries are oriented correctly.
* If you handle batteries improperly, you risk explosion and fluid leakage. Make sure that
you carefully observe all of the items related to batteries that are listed in “USING THE UNIT
SAFELY” and “IMPORTANT NOTES” (leaflet “USING THE UNIT SAFELY”).
* When turning the unit over, be careful so as to protect the buttons and knobs from damage.
Also, handle the unit carefully; do not drop it.
* When the battery runs low, the display indicates “Battery Low.” Replace the battery as soon as
possible.
Using the D-05 in conjunction with the DK-01 Boutique Dock (sold separately)
&
For installation / removal / angle adjustment, refer to the DK-01’s Owner’s Manual.
Using the D-05 in conjunction with the K-25m keyboard unit (sold separately)
&
For installation / removal / angle adjustment, refer to the K-25m’s Owner’s Manual.
Playing the D-05 via MIDI or USB
You can also play the D-05 via MIDI or USB. For details, refer to “Connecting Your Equipment.”
Connecting Your Equipment
* To prevent malfunction and equipment failure, always turn down the volume, and turn off all
the units before making any connections.
A B C D E F
G
A
Micro USB ( ) port
Use a commercially available USB 2.0 cable (A-micro B)
to connect this port to your computer. It can be used to
transfer USB MIDI and USB audio data. You must install the
USB driver when connecting the D-05 to your computer. Download the USB driver from the
Roland website. For details, refer to Readme.htm which is included in the download.
&
https://www.roland.com/support/
* Do not use a micro USB cable that is designed only for charging a device. Charge-only cables
cannot transmit data.
B
[VOLUME] knob
Adjusts the volume.
C
PHONES jack
Connect headphones (sold separately) here.
D
OUTPUT jack
Connect this jack to your amp or monitor speakers.
E
MIX IN jack
This is the audio input jack. Sound from the connected device is output from the OUTPUT jack
and PHONES jack.
F
MIDI jack
You can play the D-05 by connecting a MIDI device via a
commercially available MIDI cable.
Turning the D-05 On
G
[POWER] switch
This turns the power on/o.
* After you’ve made connections correctly, be sure to turn on the power in the order of the
D-05 first, and then the connected system. Powering-on in the incorrect order may cause
malfunctions or damage. When turning the power off, power-off the connected system first,
and then the D-05.
* Before turning the unit on/off, always be sure to turn the volume down. Even with the volume
turned down, you might hear some sound when switching the unit on/off. However, this is
normal and does not indicate a malfunction.
* The D-05 automatically powers-off when a specified length of time has elapsed since it
was last played or operated (the Auto Off function). If you don’t want the power to turn off
automatically, disable the Auto Off function.
•
When the power is turned o, any settings you were editing will be lost. You must save
settings that you want to keep.
•
To restore power, turn the power on again.
Returning to the Factory Settings (Factory Reset)
Here’s how to return the D-05 to its factory-set state.
1.
While holding down the PATCH BANK [2] button, turn on the power.
If you decide to cancel the factory reset, turn o the power.
2.
Press the [ENTER] button to execute the factory reset.
3.
When all buttons blink, turn the D-05’s power o, then on again.
Data Backup/Restore
Backup
1.
Connect your computer to the D-05’s USB port via USB cable.
2.
While holding down the [FUNCTION] button, turn on the power.
3.
Open the “D-05” drive on your computer.
The backup les are located in the “BACKUP” folder of the “D-05” drive.
4.
Copy the backup les into your computer.
5.
After copying is completed, eject the USB drive.
Windows 10/8/7
Right-click on the “D-05” icon and execute “Eject.”
Mac OS
Drag the “D-05” icon to the Trash icon in the Dock.
6.
Turn the D-05 power o.
Restore
1.
As described in the procedure for “Backup” Step 1–3, open the “D-05” drive on your
computer.
2.
Copy the D-05 backup les into the “RESTORE” folder of the “D-05” drive.
3.
After copying is completed, eject the USB drive and then press the [ENTER] button.
4.
After the LEDs have completely stopped blinking, turn o the power.
Panel Descriptions
1 2 3 4 6 7 8
5 9
1
Ribbon controller (C1/C2)
These are touch-type ribbon controllers. C1 (left) is pitch bend, and C2 (right) is modulation.
* If a K-25m keyboard unit, USB, or MIDI are not connected, touching the C1 controller plays a
preview sound.
2
Joystick
3
UPPER / LOWER / VALUE / LOCAL
These buttons switch the function of the joystick.
Indicator /
Button
Explanation
UPPER
The up/down direction changes the part balance, and the left/right direction
changes the partial balance of the selected part.
LOWER
VALUE Enters values, such as during editing.
LOCAL
Enables local editing (a function that lets you use the joystick to simultaneously
edit adjacent items in the display).
Select button Switches in the order of UPPER
LOWER VALUE LOCAL.
4
Display/ [ ] / [F1] / [F2] / [ ] buttons
From the left, these are indicated as [
] / [F1] / [F2] / [ ].
Enabled buttons (i.e., buttons that do something when pressed) are lit; disabled buttons are
unlit.
Use [ ] [ ] to switch pages. These are lit if an adjacent PAGE exists.
* Never strike or apply strong pressure to the display.
D-05MIDI keyboard
MIDI INMIDI OUT
5
[FUNCTION] [PRESET/USER] buttons
Button Explanation
FUNCTION Accesses the function menu screen.
PRESET/USER
Change the patch group.
Press this button, and then use [INCREMENT] [DECREMENT] to change.
Choose from P-1–6 and U-1–8.
After making the change, specify the patch bank and patch number to conrm.
6
[CHASE] [PORTAMENTO] [EDIT] [EXIT] buttons
Button Explanation
CHASE
Turns the Chase function on/o.
Chase is a function that sounds the upper tone when you press a key, and then
sounds a delayed note on the lower (or upper) part; it works when the key
mode is Whole or Dual. Depending on the patch, it can produce eects similar
to delay or sound-on-sound.
PORTAMENTO Turns the portamento function on/o.
EDIT Accesses the edit menu screen.
EXIT
Returns you to the previous screen.
In some screens, this button cancels the operation that’s being executed.
7
[SEQUENCER] [WRITE] [INCREMENT] [DECREMENT] buttons
Button Explanation
SEQUENCER
Accesses the sequencer screen.
Hold down the [SHIFT] button and press the [SEQUENCER] button to access the
arpeggiator screen.
WRITE Saves the sound or sequencer settings.
INCREMENT
Used to increment or decrement the value.
DECREMENT
8
Ten keys/ [SHIFT] [ENTER] buttons
Button Explanation
Ten keys
Use these buttons to edit the patch name or tone name.
For some items, these buttons can also enter a numeric value.
SHIFT
Use this button in conjunction with other buttons to access parameters or to
operate other parameters.
ENTER Press this to conrm a value or execute an operation.
9
PATCH BANK [1]–[8]/NUMBER [1]–[8] buttons
Button Explanation
PATCH BANK [1]–
[8]
Select patch banks.
When editing, you can use these buttons to select partials.
NUMBER [1]–[8]
Select the patch number.
When editing, you can use these buttons to turn partials on/o.
By simultaneously pressing two of the [1]–[16] buttons, you can connect those two steps with
a tie.
Patch
A “patch” contains sound data and data for the performance functions.
Multiple patches can be saved in patch memory, and freely recalled while you perform.
On D-05, a patch consists of two sounds (the upper tone and lower tone), settings that specify
how they are played, and settings such as keyboard mode, output mode, and reverb.
Tone
The upper and lower tones each consist of two “partials” (sound sources) and common
settings that specify how the partials are controlled.
The common settings include the type selections for the two partials, how the two partials are
combined (the “structure”), and settings such as LFO, pitch envelope, equalizer, and chorus.
Partial
A “partial” is the most basic unit of sound on D-05. There are two types of partial: a synthesizer
sound generator and a PCM sound generator. Synthesizer type partials provide a TVF (Time
Variant Filter) and a TVA, and PCM type partials provide a TVA (Time Variant Amplier).
How the Sound Engine Is Structured
Patch
Patch nameTone Tune
Tone
Balance
Variations of
Control Functions
Tone Tune
Tone
Common
P. ENV LFO1–3
Structure
Equalizer
Tone name
Chorus
Partial (Synthesizer Sound Generator)
Partial (PCM Sound Generator)
WG
Pitch
Waveform
Pulse
width
TVF
Cuto
Resonance
TVF-ENV
Filter envelope
TVA
Level
TVA-ENV
Amp envelope
WG
Pitch
PCM
wave
form
TVA
Level
TVA-ENV
Amp envelope
LFO (Low Frequency Oscillator)
LFO 1 LFO 2 LFO 3
P. ENV
Pitch envelope
Key Mode
Output Mode
(Reverb, etc.)
LOWER Tone
UPPER Tone
Partial 1
Partial 2
1

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Roland D-05 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Roland D-05 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,61 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Roland D-05

Roland D-05 Gebruiksaanwijzing - Nederlands - 2 pagina's

Roland D-05 Gebruiksaanwijzing - Deutsch - 2 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info