527435
15
Verklein
Vergroot
Pagina terug
1/42
Pagina verder
13
Português Italiano DeutschNederlands Español Français
English
You can save and call up the panel settings (those enclosed by the line
in the gure) for sounds you create. On this unit, this function is called
“SOLO. This is a convenient way to switch between a backing sound
and a solo sound.
With the factory settings, the sample setting “HEAVY BOTTOM” (p. 16) is
saved.
CUBE-60XL BASS
CUBE-120XL BASS
Saving the Panel Settings
1. Set the SOLO [VOLUME] knob to 0.
NOTE
If the SOLO volume is set high, the
sound may be unexpectedly loud
when the panel settings are saved.
Before saving, lower the volume to 0.
2. Create a sound.
3. Press and hold the SOLO [ON/OFF] switch on the panel for
several seconds.
The indicator will blink. When the panel settings
have been saved, the indicator will change from
blinking to lit.
* Never switch o the power while the indicator
is blinking.
4. Use the SOLO [VOLUME] knob to adjust
the volume.
* Saved panel settings remain in memory even after the power is
turned o.
Recalling the Saved Sound
1. With SOLO o, press the SOLO [ON/OFF] switch.
The SOLO indicator will light, and the saved panel settings will be
recalled.
* If you’re using the CUBE for the rst time, the factory settings will be
recalled.
Editing the saved settings
1. Press the SOLO [ON/OFF] switch to call up the saved settings.
2. Turn the panel knob for the item you want to change, and
modify the setting.
The SOLO indicator goes out briey when the position of the knob
coincides with the position stored in memory.
3. Hold down the SOLO [ON/OFF] switch for several seconds.
The indicator will blink. When the panel settings have been saved, the
indicator will change from blinking to lit.
* Never switch o the power while the indicator is blinking.
* Once the new settings have been saved, the previous settings in
eect before the changes cannot be called up again.
* To quit without saving the changes, press the SOLO [ON/OFF]
switch.
Note the following if you’ve set FOOT SW
TYPE to FS-5L (LATCH)
If a foot switch is connected to the SOLO/COMP/DRIVE jack, the
SOLO [ON/OFF] switch will be inoperable.
If SOLO is on, and a foot switch is connected to the SOLO/COMP/
DRIVE, EFX/REVERB or DELAY/REC/PLAY/DUB/TAP/STOP jack, the
foot switchs indicator may not match the on/o status of the CUBE’s
COMP/DRIVE, EFX, REVERB, or DELAY. If you want the on/o status
of the CUBEs COMP/DRIVE, EFX, REVERB, or DELAY to consistently
conform to the foot switchs indicator, change the setting for the
CUBE-60XL BASS/CUBE-120XL BASS to “Foot Switch Priority Mode.
For details, see ”Using a Latch-type Foot Switch (p. 11).
In order to be able to save the panel settings, you rst need to
switch on SOLO using the foot switch.
Returning to the Factory-default Settings
Hold down the [TAP/STOP] switch and the SOLO [ON/OFF]
switch at the same time and switch on the power. The SOLO
indicator blinks and the settings saved with the SOLO function
are returned to their factory defaults.
Using the SOLO Function
15

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Roland CUBE 120XL BASS bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Roland CUBE 120XL BASS in de taal/talen: Duits, Engels als bijlage per email.

De handleiding is 60,08 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Roland CUBE 120XL BASS

Roland CUBE 120XL BASS Gebruiksaanwijzing - Nederlands - 20 pagina's

Roland CUBE 120XL BASS Snelstart handleiding - Deutsch - 2 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info