527761
14
Verklein
Vergroot
Pagina terug
1/252
Pagina verder
14
Expanding the memory
The CDX-1 comes with 32 MB of memory into which audio samples can be loaded.
However, in some cases, 32 MB of memory will be insufficient for loading large
amounts of data. In such a case, you will have to add separately sold memory
(DIMM). Memory can be expanded up to 128 MB.
Before expanding the memory, consult with your retailer, the nearest Roland Service
Center, or an authorized Roland distributor.
Precautions for expanding memory
Always turn the unit off and unplug the AC adaptor before attempting
installation of the memory DIMM board.
Install only the specified memory DIMM board. Remove only the
specified screws.
To avoid the risk of damage to internal components that can be caused by static
electricity, please carefully observe the following whenever you handle the
board.
Before you touch the board, always first grasp a metal object (such as a water
pipe), so you are sure that any static electricity you might have been carrying
has been discharged.
When handling the board, grasp it only by its edges. Avoid touching any of
the electronic components or connectors.
Save the bag in which the board was originally shipped, and put the board
back into it whenever you need to store or transport it.
Do not touch any of the printed circuit pathways or connection terminals.
Never use excessive force when installing a circuit board. If it doesn’t fit
properly on the first attempt, remove the board and try again.
When circuit board installation is complete, double-check your work.
When turning the unit upside-down, get a bunch of newspapers or magazines,
and place them under the four corners or at both ends to prevent damage to the
buttons and controls. Also, you should try to orient the unit so no buttons or
controls get damaged.
When turning the unit upside-down, handle with care to avoid dropping it, or
allowing it to fall or tip over.
Use a Philips screwdriver of the appropriate size to avoid damaging the screw
heads (a number of 2 screwdriver). If an unsuitable screwdriver is used, the
head of the screw may be stripped.
Turn the screwdriver counter-clockwise to loosen the
screws-turn it clockwise to tighten them.
Be careful not to cut your hand on the edge of the cover or the opening edge
while removing the cover.
Be careful not to let the screws drop inside the CDX-1's body.
Do not touch the circuitry or the connectors.
Do not force a memory board into its slot. If it can't be inserted smoothly, take it
out, check its orientation and try again.
If you add 128 MB of
separately sold memory, the
standard 32 MB of memory
will no longer be used.
In case of expanding memory
other than 128 MB of memory,
turn on the power, a message
“Wrong DIMM Type! Turn off
the power, and replace
w/correct one” appears, and.
At this time, the CDX-1 will
not operate normally.
tightenloosen
14

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Roland-CDX-1

Zoeken resetten

  • Ik heb 2 cdx-1 van roland die allebei niet willen opnemen dwz de status verlichting die moet gaan oplichten bij aanwijzen van kanaal 1-8 gaan niet branden wat zit er fout kan iemand mij helpen gr Nico Gesteld op 25-1-2022 om 22:02

    Reageer op deze vraag Misbruik melden

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Roland CDX-1 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Roland CDX-1 in de taal/talen: Engels als bijlage per email.

De handleiding is 6,94 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Roland CDX-1

Roland CDX-1 Gebruiksaanwijzing - Nederlands - 242 pagina's

Roland CDX-1 Gebruiksaanwijzing - Deutsch - 225 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info