DIGITAL STUDIO
Model BR-532 Version: 1.00
MIDI Implementation
1. TRANSMITTED DATA
Channel Voice Message
Note On
If the MIDI parameter “Rhythm MIDI Ch.” is set to “1–16,” note numbers/velocities
corresponding to the rhythm pattern will be transmitted on the MIDI channel that is
specified for the rhythm guide.
Status Second Third
9nH mmH llH
n = MIDI Channel No. : 0H - FH (ch.1 - ch.16)
mm = Note No. : 00H - 7FH (0 - 127)
ll = Velocity : 01H - 7FH (1 - 127)
Note Off
If the MIDI parameter “Rhythm MIDI Ch.” is set to “1–16,” note numbers corresponding to
the rhythm pattern will be transmitted on the MIDI channel specified for the rhythm guide.
Status Second Third
8nH mmH llH
n = MIDI Channel No. : 0H - FH (ch.1 - ch.16)
mm = Note No. : 00H - 7FH (0 - 127)
ll = Velocity : 40H (64)
Notes sounded by the rhythm guide correspond to note numbers as
follows.
Rhythm Guide Tone Note Number
High D#1 (27)
Metronome (click) A 1 (33)
Metronome (bell) A#1 (34)
Kick B 1 (35)
Kick C 2 (36)
Clave C#2 (37)
Snare D 2 (38)
Cowbell D#2 (39)
Snare E 2 (40)
Low tom F 2 (41)
Closed hi-hat F#2 (42)
Mid tom A 2 (45)
Open hi-hat A#2 (46)
Crash cymbal C#3 (49)
High tom D 3 (50)
Ride cymbal D#3 (51)
System Common Messages
MIDI Time Code Quarter Frame Messages
If the Sync parameter “Gen.” is set to “MTC,” quarter frame messages of the time code type
specified by “MTC Type” will be transmitted when the BR-532 is running (recording or
playing). The transmitted time counts are summed to “SMPTE (MTC) Offset Time” as the
song top is “00:00:00:00”.
Status Second
F1H mmH (= 0nnndddd)
nnn = Message type : 0 = Frame count LS nibble
1 = Frame count MS nibble
2 = Seconds count LS nibble
3 = Seconds count MS nibble
4 = Minutes count LS nibble
5 = Minutes count MS nibble
6 = Hours count LS nibble
7 = Hours count MS nibble
dddd = 4 bit nibble data : 0h - FH (0 - 15)
Bit Field is assigned as follws.
Frame Count xxxyyyyy
xxx Reserved (000)
yyyyy Frame No.(0-29)
Seconds Count xxyyyyyy
xx Reserved (00)
yyyyyy Seconds (0-59)
Minutes Count xxyyyyyy
xx Reserved (00)
yyyyyy Minutes (0-59)
Hours Count xyyzzzzz
x Reserved (0)
yy Time Code type
* The time code types defined by the MIDI specification correspond to the BR-532 Sync
parameter “MTC Type” as follows.
MIDI specification setting
“MTC Type" setting
0 = 24 Frames/Sec 24
1 = 25 Frames/Sec 25
2 = 30 Frames/Sec (Drop Frame) 29D
3 = 30 Frames/Sec (Non Drop Frame) 29N or 30
zzzzz Hours (0–23)
Song Position Pointer
The current position is transmitted by the Song Position Pointer Message when the BR-532
is stopped, or the locate operation has been performed, if the SYNC parameter “Gen.” is set
to “MIDI CLOCK.”
Status Second Third
F2H mmH nnH
mm (LSB), nn (MSB) = Song Position Point : 00H 00H - 7FH 7FH
System Realtime Message
Transmitted when “Gen.” is “MIDI CLOCK” in the SYNC parameter.
Timing Clock
Status
F8H
Active Sensing
Status
FEH
* This is transmitted at intervals of approximately 200 msec.
Start
Status
FAH
Continue
Status
FBH
Stop
Status
FCH
■
■
■
❍
●
●
●
●
●
●
●
●
●
