708951
83
Verklein
Vergroot
Pagina terug
1/160
Pagina verder
Makeup Tools (rhythms and SMF)
Backing Keyboard BK-5
r
83
in the negative direction, the fewer overtones will be
allowed to pass and the sound will become softer
(darker).
NOTE
For some sounds, positive (+) “Cut Off” settings will cause
no noticeable change because the preprogrammed “Cut
Off” parameter is already set to its maximum value.
Resonance
This is a parameter one invariably associates with a
synthesizer. When the “Resonance” value is increased,
the overtones in the area of the cutoff frequency will
be emphasized, creating a sound with a strong char-
acter.
NOTE
For some sounds, negative (–) “Resonance” settings may
produce no noticeable change because the resonance is
already set to the minimum value.
The following parameters allow you to set the
sound’s “envelope”. The envelope parameters affect
both the volume (TVA) and the filter (TVF). The cutoff
frequency will rise as the envelope rises and fall as
the envelope falls.
Attack (T)
This parameter adjusts the onset of the sound. Nega-
tive values speed up the attack, so that the sound
becomes more aggressive.
Decay (T)
This parameter adjusts the time over which the
sound’s volume and cutoff frequency fall from the
highest point of the attack down to the sustain level.
NOTE
Percussive sounds usually have a sustain level of “0”. Piano
and guitar sounds are in this category. Holding the keys for
a long time will have little effect on the duration of the
notes you are playing, even if you select a high value here.
Release (T)
This parameter adjusts the time over which the sound
will decay after the note is released until it is no
longer heard. The cutoff frequency will also fall
according to this setting.
NOTE
Some sounds already contain natural (sampled) vibrato
whose depth or speed cannot be changed.
Use the following three parameters if you think the
instrument in question has too much (or could use a
little more) vibrato.
Vibrato Rate (T)
This parameter adjusts the speed of the pitch modu-
lation. Positive (+) settings make the preset pitch
modulation faster, and negative (–) settings make it
slower.
Vibrato Depth (T)
This parameter adjusts the intensity of the pitch
modulation. Positive (+) settings mean that the
“wobble” becomes more prominent, while negative
(–) settings make it shallower.
Vibrato Delay (T)
This parameter adjusts the time required for the
vibrato effect to begin. Positive (+) settings increase
the time before vibrato will begin and negative set-
tings (–) shorten the time.
Mfx
The BK-5 contains 2 multi-effects processors (“Mfx”),
one reverb processor and one chorus processor that
can be used to process rhythms or Standard MIDI
Files.
Select “Off” for instruments that don’t need to be
processed by any Mfx.
NOTE
If you select “A” or “B”, additional parameters can be edited
(see below).
Parameter Setting
Cut Off -127~+127
Parameter Setting
Resonance -127~+127
Parameter Setting
Attack -127~+127
Parameter Setting
Decay -127~+127
Characteristics of a low-pass filter
Cutoff frequency
Frequency
Setting
Parameter Setting
Release -127~+127
Parameter Setting
Vibrato Rate -127~+127
Parameter Setting
Vibrato Depth -127~+127
Parameter Setting
Vibrato Delay -127~+127
Parameter Setting
Mfx Off, A, B
BK-5_US.book Page 83 Thursday, May 23, 2013 7:01 PM
83

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Roland BK-5 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Roland BK-5 in de taal/talen: Engels als bijlage per email.

De handleiding is 9,71 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Roland BK-5

Roland BK-5 Gebruiksaanwijzing - Deutsch - 147 pagina's

Roland BK-5 Aanvulling / aanpassing - English - 6 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info