Handleiding Roland AX-Edge (pagina 11 van 22) (Engels)

708898

Verklein

Vergroot

Pagina terug

1/22

Pagina verder

If you want to save the setting, execute the System Write

operation.

“Saving the System Settings (System Write)” (p. 20)

* You can assign a function other than [HOLD] to this button. For details

on how to assign a function to this button, refer to “Assigning the

Function of Each Controller” (p. 12).

Layering the Same Tone to Thicken the

Sound (Unison)

If you turn “Unison” on, the sound is thickened by layering an

identical but slightly pitch-shifted tone onto the tone of part 1.

Unison turns on/off each time you press the [UNISON] button.

MEMO

The depth of the effect differs depending on the settings of the tone

that’s selected.

Turning unison on only while you hold down the button

Here’s how to make the unison function turn on only while you hold

down the [UNISON] button. When you release the button, unison

turns off.

Press the [MENU/WRITE] button.

Use the cursor [

] [

] buttons to select “SYSTEM,” and

then press the [ENTER] button.

Use the cursor [

] [

] buttons to select “S3 (M),” and use

the [–] [+] buttons to change the value to “MOMENTARY.”

If you want to save the setting, execute the System Write

operation.

“Saving the System Settings (System Write)” (p. 20)

* You can assign a function other than [UNISON] to this button. For

details on how to assign a function to this button, refer to “Assigning

the Function of Each Controller” (p. 12).

Preventing the Sound from Changing

During Performance (Lock)

You can disable some of the AX-Edge’s buttons to prevent the

sound from being inadvertently switched if you press a button

accidentally.

Hold down the [LOCK] button until it is lit.

The lock function turns on, and the buttons other than in the

neck control section are disabled.

To return to the normal state, once again hold down the [LOCK]

button until it is unlit.

MEMO

The lock function does not apply to the buttons of the neck control

section.

The lock function is valid only in the top screen (the program select

screen).

Modifying the Sound While You

Perform

The AX-Edge lets you use various controllers to modify the sound

while you perform.

Using the MODULATION BAR

Press the MODULATION BAR to apply modulation.

* The effect applied by the MODULATION BAR differs depending on the

setting. Normally, pressing the MODULATION BAR applies a vibrato

effect. To change the setting, refer to “Assigning the Function of Each

Controller” (p. 12).

Using the RIBBON CONTROLLER

You can modify the sound by pressing your finger on the RIBBON

CONTROLLER and moving it to left or right. For this controller, the

sound also changes according to the pressure of your finger.

* The effect applied by the RIBBON CONTROLLER differs depending

on the setting. Normally, left/right motion operates as pitch bend to

change the pitch. Pressure on the controller applies a vibrato-type

effect. To change the setting, refer to “Assigning the Function of Each

Controller” (p. 12).

Disabling the RIBBON CONTROLLER

You can disable the AX-Edge’s RIBBON CONTROLLER operations if

you like. This is convenient when you want to apply an effect only in

response to left/right movement or only in response to pressure.

Press the [MENU/WRITE] button.

Use the cursor [

] [

] buttons to select “SYSTEM,” and

then press the [ENTER] button.

Use the cursor [

] [

] buttons to select a parameter, and

use the [–] [+] buttons to change the value.

[SHIFT] + cursor [K] [J]

Parameter

Cursor [K] [J]

Value

[–] [+]

CTRL RIBBON

Posi (Position)

OFF: Left/right operation

is disabled.

Pres (Pressure)

OFF: Pressure operation is

disabled.

Various other settings are also available.

For details, refer to “Parameter Guide” (PDF).

MEMO

If you want to save the setting, execute the System Write operation.

“Saving the System Settings (System Write)” (p. 20)

Depending on the settings of the program, operation might not be

disabled even if you change the system settings. For details, refer to

the parameter guide.

Owner’s Manual

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

lees eerst de handleiding door;
controleer of uw vraag al eerder door iemand anders is gesteld;
probeer uw vraag zo duidelijk mogelijk te stellen;
heeft u een probleem en al geprobeerd om dit op te lossen, vermeld dit erbij aub;
heeft u een oplossing gekregen van een bezoeker dan horen wij dat graag in dit forum;
wilt u een reactie geven op een vraag of antwoord, gebruik dan niet dit formulier maar klik op de knop 'reageer op deze vraag';
uw vraag wordt direct op de website gezet; vermijd daarom persoonlijke gegevens in te vullen;

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Roland AX-Edge Handleiding

Hulp nodig? Stel uw vraag in het forum

Misbruik melden

Product:

Spelregels forum

Abonneren

Ontvang uw handleiding per email

Stel vragen via chat aan uw handleiding

Andere handleiding(en) van Roland AX-Edge

Uw handleiding is per email verstuurd. Controleer uw email

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

U heeft geen emailadres opgegeven

Uw vraag is op deze pagina toegevoegd

Info