708869
59
Verklein
Vergroot
Pagina terug
1/72
Pagina verder
59
MIDI Implementation
Appendices
MIDI Time Code
Full Messages
* Data is received when Sync Source is set to "MTC." When the Quarter Frame message is
received, operation proceeds with the start of the song synchronized to
"00h00m00s00f00" with the "MTC Offset" and the "Delay Time" added.
* This acts upon the currently selected audio phrase.
* MIDI phrases and pattern phrases are ignored when Dual Mono mode is selected.
Status
Data Bytes Status
F0H 7FH, dev, 01H, 01H, 06H, F7H
01H, hrH, mnH, scH, frH
Byte Description
F0H Status of Exclusive Message
7FH Universal System Exclusive Message Real time Header
dev device ID (or 7FH)
01H sub-ID#1 (MIDI Time Code)
01H sub-ID#1 (Full Messages)
06H number of bytes
01H [TARGET] sub command
hrH Hours Count xyyzzzzz
x Reserved (0)
yy Time Code type
0 = 24 Frames / Sec
1 = 25 Frames / Sec
2 = 30 Frames / Sec (Drop Frame)
3 = 30 Frames / Sec (Non Drop Frame
zzzzz Hours (0-23)
mnH Minutes Count xxyyyyyy
xx Reserved (00)
yyyyyy Minutes (0-59)
scH Seconds Count xxyyyyyy
xx Reserved (00)
yyyyyy Seconds (0-59)
frH Frame Count xxxyyyyy
xxx Reserved (000)
yyyyy Frame No.(0-29)
F7H EOX (End of Exclusive)
MIDI Machine Control (MMC)
* This is Received when the MMC mode is set to "SLAVE."
* This acts upon the currently selected phrase.
STOP (MCS)
Status
Data Bytes Status
F0H 7FH, dev, 06H, 01H F7H
Byte Description
F0H Status of Exclusive Message
7FH Universal System Exclusive Message Real time Header
dev device ID (or 7FH)
06H MMC Command Message
01H STOP (MCS)
F7H EOX (End of Exclusive Message)
* Playback is stopped immediately when this command is received if the device ID
matches, or if 7FH is received.
PLAY (MCS)
Status
Data Bytes Status
F0H 7FH, dev, 06H, 02H F7H
Byte
Description
F0H Status of Exclusive Message
7FH Universal System Exclusive Message Real time Header
dev device ID (or 7FH)
06H MMC Command Message
02H PLAY (MCS)
F7H EOX (End of Exclusive Message)
* Playback is started immediately when this command is received if the device ID
matches, or if 7FH is received.
DEFERRED PLAY (MCS)
Status
Data Bytes Status
F0H 7FH, dev, 06H, 03H F7H
Byte Description
F0H Status of Exclusive Message
7FH Universal System Exclusive Message Real time Header
dev device ID (or 7FH)
06H MMC Command Message
03H DEFERRED PLAY (MCS)
F7H EOX (End of Exclusive Message)
* Playback is started immediately when this command is received if the device ID
matches, or if 7FH is received.
RECORD STROBE (MCS)
Status
Data Bytes Status
F0H 7FH, dev, 06H, 06H F7H
Byte
Description
F0H Status of Exclusive Message
7FH Universal System Exclusive Message Real time Header
dev device ID (or 7FH)
06H MMC Command Message
06H RECORD STROBE (MCS)
F7H EOX (End of Exclusive Message)
* Recording of the phrase begins when this command is received if the device ID matches,
or if 7FH is received.
* If MIDI signal recording is in effect, this command is ignored (MIDI cannot be recorded
with MMC).
RECORD EXIT (MCS)
Status
Data Bytes Status
F0H 7FH, dev, 06H, 07H F7H
Byte Description
F0H Status of Exclusive Message
7FH Universal System Exclusive Message Real time Header
dev device ID (or 7FH)
06H MMC Command Message
06H RECORD STROBE (MCS)
F7H EOX (End of Exclusive Message)
* Recording is stopped immediately when this command is received if the device ID
matches, or if 7FH is received.
* If MIDI signal recording is in effect, this command is ignored (MIDI cannot be recorded
with MMC).
LOCATE (MCP)
Format 2 - LOCATE [TARGET]
Status
Data Bytes Status
F0H 7FH, dev, 06H, 44H, 06H, F7H
01H, hrH, mnH, scH, frH, ffH
Byte Description
F0H Status of Exclusive Message
7FH Universal System Exclusive Message Realtime Header
dev device ID (or 7FH)
06H MMC Command Message
44H LOCATE(MCP)
06H Number of Bytes
01H [TARGET] sub command
hrH Standard time with Sub Frame
mnH
scH
frH
ffH
F7H EOX (End of Exclusive Message)
* If the device ID matches, or if 7FH is received, then when this command is received, the
location of the time code specified in the command data is located.
* MIDI phrases and pattern phrases are ignored when Dual Mono mode is selected.
AR-200_e.book 59 ページ 2003年7月14日 月曜日 午後1時11分
59

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Roland AR-200 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Roland AR-200 in de taal/talen: Engels als bijlage per email.

De handleiding is 2,6 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info