622366
16
Verklein
Vergroot
Pagina terug
1/24
Pagina verder
16
Supplementary Notes
How to connect the VM-7000 series and the
ADA-7000
To connect the VM-7200/7100 and the ADA-7000 via R-BUS, VM-24E I/O Expansion Board (sold separately) is
needed. By installing the VM-24E to a VM-7200/7100 processor, you can connect up to three ADA-7000’s.
* Refer to VM-7200/7100 Owner’s Manual p. 14 “Installing
R-BUS (RMDB2) Connectors (VM-24E).”
Connection
Connect the VM-7200/7100 and the ADA-7000 with the
R-BUS cable attached in the ADA-7000 box.
* Refer to ADA-7000 Owner’s Manual p. 9 “An Example of Connection.”
Booting up
Turn the power on the ADA-7000 first, then VM-7200/7100 processor, and finally VM-C7200/C7100 console.
Clock source setting
If clock source has not been set, noise may be generated from the audio output on the ADA-7000 and the VM-7000.
While setting the clock source, please turn down the master and monitor level, and turn up again after the setting is
finished. Set the sampling clock on the ADA-7000 and the VM-7000 as follows.
Clock Source on the ADA-7000
connected to the R-BUS (1–8): R-BUS
Clock Source on the ADA-7000
connected to the R-BUS (9–16): R-BUS
Clock Source on the ADA-7000
connected to the R-BUS (17–24): R-BUS
Master clock on the VM-7000: INTERNAL
ADA-7000 setting
Check if the clock source on the ADA-7000 is set to R-BUS. When the ADA-7000 is booted up, the clock source is set
to R-BUS. If you connect multiple ADA-7000, set the clock source on all ADA-7000 to R-BUS.
* Refer to ADA-7000 Owner’s Manual p. 6 “Clock source.”
VM-7000 setting
Set the master clock of the VM-7200/7100 to INTERNAL as follows.
1. Hold down [SHIFT], and press [PROJECT].
2. Press [DOWN] cursor, then [F1 (DIGITAL I/O)].
3. Select “WORD CLOCK SOURCE,” and set it to “INTERNAL” with V1 knob, then press [F1 (SET)] to activate the result.
* Refer to VM-C7200/C7100 Owner’s Manual p. 32 “Checking the overall system.”
* If you set the clock source differently, please refer to the
ADA-7000 Owner’s Manual p. 6 “Clock source” and the
VM-C7200/C7100 Owner’s Manual p. 31 “About Digital Connections and the Master Clock.”
*VM-7000 is not accommodated with 96.0 kHz sample rate. 96.0 kHz sample rate capability on the ADA-7000 is for
the future devices.
* If the system of the VM-C7200/C7100 is version 1.0x,
“DIF-AT” is displayed in the R-BUS CONFIG page even though the ADA-7000 is connected. This cause no problem
for the operation. With the VM-C7200/C7100 version 1.10 or later, you can set the ADA-7000 with the R-BUS
CONFIG page.
16

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Roland ADA-7000 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Roland ADA-7000 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,45 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info