14
SPECIFICATIONS
MODEL- POWER T10001 bd T20001 bd T30001 bd T40001 bd
Continuous Power Rating (RMS) - Measured at 14.4 Battery Volts
4 Load Per Channel 500 Watts x 1 750 Watts x 1 1000 Watts x 1 1500 Watts x 1
2 Load Per Channel 750 Watts x 1 1500 Watts x 1 2000 Watts x 1 3000 Watts x 1
1 Load Per Channel 1000 Watts x 1 2000 Watts x 1 3000 Watts x 1 4000 Watts x 1
Dimensions: Height 2.6" (6.60cm) 2.6" (6.60cm) 2.6" (6.60cm) 2.6" (6.60cm)
Width 12.8" (32.51cm) 12.8" (32.51cm) 12.8" (32.51cm) 12.8" (32.51cm)
Length 18" (45.72cm) 23" (58.42cm) 33" (83.82cm) 33" (83.82cm)
Amplifier Fuse Rating (Amp/Type) (1) 150A / ANL (1) 250A / ANL (1) 300A / ANL (2) 300A / ANL
(Stacked)
Battery Fuse Rating (Amp) External 150A 250A 300A 600A
(Not Supplied)
Signal-to-Noise Ratio >80dB A-weighted @ 2Vrms
Crossover Slope 24dB/octave Butterworth
Crossover Frequency variable from 32Hz to 250Hz
Frequency Response 20Hz to 250Hz -3dB
Slew Rate 30 Volts/µS
IM Distortion (IHF) <0.05%
Signal Voltage Adjustment Range Variable from 150mV to 4V (RCA Input)
Protection Short circuit protection shut downs the amplifier in
case of very low impedance or shorted speaker wires.
Thermal switch shuts down the amplifier in case of overheating.
Equalization (Variable Punch Bass) Variable from 0dB to +18dB @ variable 35 to 70Hz
Input Impedance 10k ohms
Infrasonic Filter Selectable 12dB/Octave, -3dB @ 28Hz
These specifications are Amplifier Power Standard CEA-2006 Compliant
Specifications subject to change without notice