512472
40
Verklein
Vergroot
Pagina terug
1/60
Pagina verder
40
WARNING!
Never let Robomow operate without supervision. Serious injury can
occur. Insure that the scheduled operating times that you program in
for automatic start and mowing are times when the mowing area will
be free of children and pets. Do not program times unless you are
certain
the area will be free of children, pets and bystanders.
Chapter 3 – Operation and Charging
3.1 Edge Mowing
The first mowing chore for Robomow is mowing the edge. Edge is the outer perimeter of the active
zone Robomow is working within. This is essential where you placed your perimeter wire in the wire
set-up.
Edge mowing provides a clean even cut around the perimeter and helps to minimize the amount of
trimming along walls and other obstacles.
Edge in Base Station Zone
- Robomow leaves the Base Station (at the scheduled time or when pressing the ‘GO’ button once) to
mow the edge of the lawn. It will mke exactly one turn until it reaches the Base Station contacts;
- It will reverse out and move back to continue mowing the inner area of your lawn (see paragraph
3.2).
Edge in None-Base Zone
- Place Robomow inside the lawn, switch on the Perimeter Switch on and press the ‘GO’ button once;
- Robomow will automatically find the edge (perimeter). It will now begin mowing the edge, completing
one to two complete passes around the perimeter and then turn into the lawn to mow the inner area
of the lawn;
- It will then drive into the lawn and begin what is called the scanning process (see paragraph 3.2).
3.2 Scanning (Mowing of the inner area)
The scanning process is simply a process whereby Robomow is moving across your lawn while it is
mowing.
Robomow’s movement pattern is irregular with combination of parallel lines in narrow passes. Keep in
mind that the Robomow will not mow all the grass on its first pass; in fact it will leave uncut grass in
between many of the passes it makes. This is expected and is entirely normal. These uncut areas will
be cut on subsequent passes of the Robomow across the lawn. Just like a dishwasher, wait until the
job is finished before you can appreciate the results.
Robomow will continue to run for the amount of time selected or for the default
‘MAX’ time, which is
generally 2.5 hours, depending on grass type and condition.
3.3 Skipping Edge Mowing
Robomow provides a means that will allow you to skip the edge mowing process and start directly with
the scanning (mowing) process. In order to do this, simply press the
‘GO’ button twice at the initial
startup of the mower. Pressing
‘GO’ the second time immediately following the first press will tell the
mower to skip mowing the edge.
To skip the edge mowing in the
‘Advanced weekly program’ set the operation mode to ‘M’ (where
‘M’ is for ‘mowing’ the inner area only and
‘E+M is for ‘edge + mowing’ of the inner area).
3.4 Operation in Base Zone – Automatic Start
Automatic Start mode is used as a fully automatic solution to maintain your lawn.
This mode enables you to set a weekly program, and the mower will automatically start to mow and
drive back for charging at the Base Station when finished.
To set the weekly program refer to Chapter 2.1.1, ‘Set Zone: Base’.
40

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Robomow-RM510

Zoeken resetten

  • Ik krijg constant de melding 'Bumper ingedrukt', de robot blijft dan rondjes draaien rond wijn as en begint niet te maaien. Wat kan ik hieraan doen? De melding verdwijnt en de robot rijdt soms een halve minuut rond wanneer ik tegen de achterbump aanduw tijdens het opstarten van het maaiproces. Gesteld op 10-3-2024 om 11:53

    Reageer op deze vraag Misbruik melden
  • Hoe repareer ik de perimeterdraad eerst koperdraad aan elkaar en dan in de draadconnectoers? Gesteld op 25-6-2019 om 17:37

    Reageer op deze vraag Misbruik melden

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Robomow RM510 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Robomow RM510 in de taal/talen: Engels als bijlage per email.

De handleiding is 3,2 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Robomow RM510

Robomow RM510 Gebruiksaanwijzing - Nederlands - 60 pagina's

Robomow RM510 Gebruiksaanwijzing - Deutsch - 60 pagina's

Robomow RM510 Gebruiksaanwijzing - Français - 61 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info