512472
35
Verklein
Vergroot
Pagina terug
1/60
Pagina verder
35
Zone: Base Max
Confirm
Zone: Base 1:30
Confirm
Work time
Press GO
Scroll to select different
operating time.
Press ‘GO’ to confirm
Press ‘GO’ to set ‘Work time’
Zone: Base Max
Confirm
Zone: Base Max
Confirm
Zone: Base Max
Confirm
Zone: Base 1:30
Confirm
Zone: Base 1:30
Confirm
Zone: Base 1:30
Confirm
Work time
Press GO
Work time
Press GO
Work time
Press GO
Scroll to select different
operating time.
Press ‘GO’ to confirm
Press ‘GO’ to set ‘Work time’
Figure 2.11
Setting the
‘Work time’
Figure 2.13
Non-Base Station
zones setu
p
o
p
tions
Set zone: Base
Set zone: A
Set zone: B
Work time
Learn edge
Set default edge
2.1.1
2.1.2
2.1.2.1
2.1.2.2
2.1.2.3
Set zone: Base
Set zone: A
Set zone: B
Work time
Learn edge
Set default edge
2.1.1
2.1.2
2.1.2.1
2.1.2.2
2.1.2.3
The ‘Work time is set per zone, allowing you to set different operating time for several
different zones that are of varying sizes.
The ‘Advanced’ weekly program allows to set different work time per operation (refer to
‘Advanced weekly program’ in paragraph 2.1.1.1).
2.1.1.6 External Base
Allows the option to setup the Base Station outside the lawn; recommended
when you want to conceal the mower from people eyes while not mowing.
The default set by the producer is set to ‘off’; if you setup Robomow outside
the lawn it is required to change the setting of ‘External base’ to ‘on’.
The mower follows the wire for 5m (15ft) from the Base Station before it
enters to mow the inner area, thus it is recommended to set the Base Station
at maximum 3-4m (10-13ft) from the lawn; however if you want to set the
mower in a bigger distance from the lawn, you have to increase the ‘Distance’
setting (in the ‘External base’ menu) respectively.
To perform external setup of the Base Station refer to paragraph 1.3.2.
2.1.2 Set zone: A (or B)
Allows user to set the parameters that are specific per non-Base Station zone (figure 2.13):
2.1.2.1 Work time
Allows the user the option of setting the operating time from 15 minutes up to 2 hours and ‘
MAX’
which is generally 2.5 to 3.5 hours, depending on grass type and condition.
2.1.2.2 Learn Edge
This menu option is used in a non-Base zone only. The default distance for edge mowing is
approximately 1 to 2 rounds around the perimeter. This feature allows the user to define a specific
distance in each operating zone in order to have the mower cut the edge at a specific distance. It
will remain as a learned distance until the edge is re-learned or the
‘Set default edge’ is selected.
To learn edge distance follow the instructions below (figure 2.14):
2.1.2.3 Set Default Edge
Selecting Default Edge restores the factory default edge distance to the specific zone selected.
Figure 2.14
Learn edge
Set zone: A
Press GO
Scroll DOWN once to
‘Learn edge’ option
Scroll to the zone of which
you want to learn the edge
distance and press ‘GO
Press ‘GO’ to start
the learning process
Work time
Press GO
Learn edge
Press GO
Learning edge
STOP to set
While driving around the perimeter.
Follow the mower and press the
STOP’ button when the desired
distance has been reached.
Set zone: A
Press GO
Set zone: A
Press GO
Scroll DOWN once to
‘Learn edge’ option
Scroll to the zone of which
you want to learn the edge
distance and press ‘GO
Press ‘GO’ to start
the learning process
Work time
Press GO
Work time
Press GO
Work time
Press GO
Learn edge
Press GO
Learn edge
Press GO
Learn edge
Press GO
Learning edge
STOP to set
Learning edge
STOP to set
Learning edge
STOP to set
While driving around the perimeter.
Follow the mower and press the
STOP’ button when the desired
distance has been reached.
35

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Robomow-RM510

Zoeken resetten

  • Ik krijg constant de melding 'Bumper ingedrukt', de robot blijft dan rondjes draaien rond wijn as en begint niet te maaien. Wat kan ik hieraan doen? De melding verdwijnt en de robot rijdt soms een halve minuut rond wanneer ik tegen de achterbump aanduw tijdens het opstarten van het maaiproces. Gesteld op 10-3-2024 om 11:53

    Reageer op deze vraag Misbruik melden
  • Hoe repareer ik de perimeterdraad eerst koperdraad aan elkaar en dan in de draadconnectoers? Gesteld op 25-6-2019 om 17:37

    Reageer op deze vraag Misbruik melden

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Robomow RM510 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Robomow RM510 in de taal/talen: Engels als bijlage per email.

De handleiding is 3,2 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Robomow RM510

Robomow RM510 Gebruiksaanwijzing - Nederlands - 60 pagina's

Robomow RM510 Gebruiksaanwijzing - Deutsch - 60 pagina's

Robomow RM510 Gebruiksaanwijzing - Français - 61 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info