537225
8
Verklein
Vergroot
Pagina terug
1/50
Pagina verder
8
2.2 How Robomow Works for You
Perform a One-Time Setup before operating Robomow for the
rst time.
[Detailed instructions are in the following chapters]
• Install a wire around the entire lawn and around protected
areas within the lawn area.
• The Perimeter Wire sets the boundaries for Robomow.
The Perimeter Wire is laid around the edges of the lawn and
around trees, plants, ponds and objects that you want to
prevent Robomow to run into.
• If the supplied wire is not sufcient, more wire can be purchased
and spliced with a supplied connector to the existing wire.
• Small pegs are used to fasten the Perimeter Wire into the
ground, below grass level.
• The Perimeter Wire will gradually disappear under the growth
of new grass until it will be invisible.
• You will place a Base Station along the Perimeter Wire. They
perform two basic functions:
- Generate a signal along the Perimeter Wire.
- Charge Robomow’s batteries.
• The Power Box is connected between the Base Station and a
230V wall socket, using a 15m long low voltage cable.
• After having completed the installation of the Perimeter Wire, Base Station, and the Power Box, and performing
the One-Time Setup, Robomow will do all the mowing for you for the entire season!
• Robomow is a robotic lawn mower that is powered by a maintenance-free battery. It leaves its Base Station at
the scheduled mowing time. Robomow mows the lawn and then drives back to the Base Station to be charged
and ready for its next scheduled mowing.
• As soon as Robomow leaves for mowing, the Base Station automatically triggers a special signal. This signal
creates a virtual wall, visible only to Robomow. This signal keeps Robomow within the lawn boundaries, and
prevents it from entering areas it was programmed to skip or protect.
Peg
Tree surrounded by a groove, ditch or flower beds
requires a wire around it.
Perimeter wire as a
virtual wall,visible only
to Robomow
Base Station and Power Box:
- Generates signal along the wire.
- Charges Robomow’s battery.
Large trees: Robomow is allowed to bump
into them. at this size, the objects do not
require a Perimeter Wire around them
Robomow detects the signal
and changes direction as it
reaches the wire
Large trees: Robomow is allowed to bump
into them. at this size the objects do not
require a Perimiter Wire around them
Base Station and Power Box:
- Generates signal along the wire.
- Charges Robomow’s battery.
Robomow detects the signal
and changes direction as it
reaches the wire
Perimiter wire as a
virtual wall, visible only
to Robomow
Tree surrounded by a groove, ditch or ower beds
requires a qire around it.
Perimiter Wire
8

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Robomow MC300 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Robomow MC300 in de taal/talen: Engels als bijlage per email.

De handleiding is 3,9 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Robomow MC300

Robomow MC300 Gebruiksaanwijzing - Nederlands - 50 pagina's

Robomow MC300 Gebruiksaanwijzing - Deutsch - 50 pagina's

Robomow MC300 Snelstart handleiding - English - 4 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info