625561
9
Verklein
Vergroot
Pagina terug
1/46
Pagina verder
8 V0913 NX SERIES
English
Always use appropriate protection devices and always observe the specic regulations for accident
prevention.
Despite the use of specic protection devices and the application of the hygiene and safety
instructions, some risks remain when working with the moulder-shaper:
Risk of accidents in the insecure area of the tools
Risk of wounding while replacing tools
Risk of wounding by the piece of wood itself, or by wood shavings
Crushing of the ngers
Risk of jamming of the hand in the machine, when using a removable pusher
Risk of back kicked pieces of wood
Health risks through prolonged inhalation of particles, especially oak, beech or other exotic sorts of
wood
Deafness through prolonged exposition to noise
PLANER-THICKNESSER
The planer-thicknesser is designed for the following processes, and is equipped with protection devices
and can only be used to work wood. All working processes that do not comply with these instructions
are therefore prohibited.
Planing the wide surface of the work pieces on the planer unit;
Planing the narrow side of the work piece on the planer unit;
Bevelling an edge on work pieces on the planer unit;
PROHIBITED USE
The following tasks are prohibited on the planer-thicknesser unit:
down cut planing i.e. when the feeding direction and the planer’s arbour rotation and direction are
the same and the outfeed planer table is set lower than the infeed table;
insertion cuts on the planer unit i.e. when the work piece is not worked along its entire length;
REMAINING RISKS
The most common danger areas on the planer-thicknesser unit are:
the working area;
the rotating tool, e.g. contact with the blades, getting caught in the rotating planer arbor, ejection of
work parts, knots, etc;
the work piece kickback area.
Despite the use of specic protection devices and the application of the hygiene and safety
instructions, some risks remain when working with the planer-thicknesser:
Risk of accidents in the insecure area of the tools
Risk of wounding while replacing tools
Risk of wounding by the piece of wood itself, or by wood shavings
Crushing of the ngers
Risk of jamming of the hand in the machine, when using a removable pusher
Risk of backkicking
Health risks through prolonged inhalation of particles, especially oak, beech or other exotic sorts of
wood
Deafness through prolonged exposition to noise
9

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Robland-NXSD-310

Zoeken resetten

  • Even een simpele vraag voor NXSD 310 moet ik de handel voor de aandrijfwalsen naar beneden zetten voor werking of naar boven? Gesteld op 5-8-2020 om 11:03

    Reageer op deze vraag Misbruik melden

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Robland NXSD 310 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Robland NXSD 310 in de taal/talen: Engels als bijlage per email.

De handleiding is 1,93 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Robland NXSD 310

Robland NXSD 310 Gebruiksaanwijzing - Nederlands - 100 pagina's

Robland NXSD 310 Gebruiksaanwijzing - Deutsch - 100 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info