625546
25
Verklein
Vergroot
Pagina terug
1/98
Pagina verder
24 V0212 HX SERIES
English
Deutsch
Adjusting the spindle height (g. 18)
1 Unlock the locking lever (3) by turning it to the left.
2 The spindle arbour can be raised or lowered using the hand wheel (4).
3 After height adjustment always secure the spindle arbour by locking the lever (3) by turning it to
the right.
Remark: When, after intensive use of the locking lever (3), it is no longer possible to lock this lever, take
off the nut and remove the lever. Then turn it 1/6 turn to the right before putting it back on again. Put the
nut back on and tighten it.
The spindle fence
Working with the spindle fence (fig. 19)
The spindle fence is tted onto the table with two locking knobs (1). The body of the spindle fence is
equipped with two slots which enables front and back movement. When the fence is tted onto the
table, the position of the aluminium fence plates can be adjusted by means of the adjustment knob
(2). The opening of the 2 fence plates goes like follows: loosen the wing nut (3) which hold the fence
and move the fence towards each other, so there is a minimal gap between the protruding tool and the
fence plates. It is advisable to use a false fence or integrated fence which is mounted between the 2
spindle fences. The adjustment of the fences can be checked with a at and precise rule.
Before starting the machine, the blocking of the bars of the fences on the table has to be checked. The
wood pushers exert vertical and horizontal pressure on the work piece, which pushes the work piece
against the table and the fence and which makes it slide easily. The manual wood pusher (g. 20),
supplied with the machine, can be used to push the wood safely. Not one element is xed on the useful
table surface. The 10 mm space between the base of the horizontal wood pusher and the table makes
it possible to move the wood pusher under the wood pushers. To replace the spindle tool, or to make
use of the feeder, the whole pusher system can be cleared by ipping it over to the back of the spindle
fence: Pull the lever in the direction of the arrow. Lift up a little the cover plate. Now the system can
be ipped over to the back. This part will prevent the fences from falling down. It is advisable to use a
feeder system, as the kick back usually happens whilst working with the spindle fence when only a part
of the piece is machined.
Clean apparatus make adjustment easier. Fences in a perfect state are advisable for quality work.
Therefore, they should be replaced when the edge or surface is damaged by the spindle tool.
Adjustments (g. 20)
3 adjustments have to be made:
Adjustments of the spindle fences as close as possible tot the outer tool diameter, and adjustment
of the depth of cut.
Adjustments of the vertical pusher according to the height of the work piece
Adjustments of the horizontal pusher according to the width of the work piece
There can ‘t be too much pressure on the pushers, so the wood can slide easily between the wood
pushers and the fences
Important:
Before starting the spindle, all locks and settings should be checked, and check manually if the tools
can rotate freely. Always use the supplied wood pushers on the fence. This upper cover plate is used as
protection of the upper part of the spindle tool.
25

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Robland-HX310

Zoeken resetten

  • Beste Lezer

    Ik heb een robland hx 310 en waarschijnlijk is de v snaar van het zaagblad kapot of eraf geschoten. Dit zit allemaal weggewerkt en is niet zichtbaar. Heeft iemand ervaring, informatie of documentatie hoe je daar bij komt ?
    vr.gr. Wim Loman


    Gesteld op 9-12-2021 om 12:31

    Reageer op deze vraag Misbruik melden

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Robland HX310 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Robland HX310 in de taal/talen: Duits, Engels als bijlage per email.

De handleiding is 5,13 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Robland HX310

Robland HX310 Gebruiksaanwijzing - Nederlands - 48 pagina's

Robland HX310 Gebruiksaanwijzing - Nederlands, Français - 102 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info