●Selectthefunction name
and return to the Model
menu by touching the
RTN button.
<SensorTouch™>
CAMBER MIX
[Corresponding model type]: Airplane/glider, 2 ailerons or more
This function adjusts the rate of camber
operation for the wing camber (ailerons, camber
flaps, brake flaps) in the negative and positive
directions. The aileron, flap, and elevator rates
can also be adjusted independently and attitude
changes caused by camber operation can be
corrected.
*Initial setting assigns camber operation to side lever LS.
● Theup/downsideratesof theaileron,flap, and
elevator servos can be adjusted. When the mixing
direction is reversed by the linkage, adjustments
can be made by changing the mixing rate
polarity (+ or -).
●Mixingduring flightcan be turnedON/OFF by
setting a switch. (Always ON at [--] setting)
●Aconditiondelaycanbeset.Acutswitchwhich
can turn OFF the delay function can be set.
●Conditiondelay
cut switch
●Conditiondelay
setting
●Aileronrate
adjustment
(Glider: Currently selected
condition name)
●Select [CAMBER MIX] attheModel
menu and access the setup screen
shown below by touching the RTN
button.
*The display screen is an example. The actual
screen depends on the model type.
Scrolling
●Movingcursor
●Selectingmode
●Adjustingvalue
●Tonextpage
●Flaprate
adjustment
●Elevatorrate
adjustment