●Selectthefunction name
and return to the Model
menu by touching the
RTN button.
<SensorTouch™>
PROG. MIX
Program mixing which can be freely customized. Up to five mixings
can be used for each model. [All model types]
Programmable mixing may be used to correct
undesired tendencies of the aircraft, and it may also be
used for unusual control congurations. Mixing means
that the motion of a command channel, called the
"master," is added to the motion of the mixed channel,
called "slave."
You may choose to have the Master's trim added to
the Slave channel response ("Trim" setting). The mixing
curve (Linear/5-point) can be changed. You may select
Mixing ON/OFF switch, control or you may choose to
have mixing remaining on all the time.
The Programmable mixing includes a powerful link
function, which allows Programmable mixing to be
linked with the special mixing functions, or with other
programmable mixing functions. The link function can
be set up for Master and Slave channel individually.
●Select[PROG.MIX]attheModelmenuandaccess
the setup screen shown below by touching the
RTN button.
●Linksetting
●Trimmodesetting
●ON/OFF
Scrolling
●Movingcursor
●Selectingmode
●Adjustingvalue
●Tonextpage
Mix setup screen call
● Movethecursortothemix#whosefunctionyouwanttoactivate
and access the setup screen by touching the RTN button.
[Linear curve] [5-point curve]
●CurrentmixNo.
●MasterCH
●SlaveCH
●Switchselection
●Curveselection ●Curveselection●Offsetrate(X,Y)
●Mixingrate(Left/right,up/down)
●Pointrate(point1-5)
●Mix#
Prog. mix setting procedure
●Activate the function.
Move the cursor to the [ACT] item and touch
the RTN button to switch to the data input
mode.
Select the ACT mode by scrolling the touch
sensor.
*The display blinks.
Tou ch the RTN butt on to activ ate the
function and return to the cursor mode.
*The function is activated. (ON or OFF display)
*ON/OFF switch and mix rate are not set even though the
function is activated.
