747912
26
Verklein
Vergroot
Pagina terug
1/38
Pagina verder
26
REVO Pitch-rudder mixing function (HELI only)
This mix adds rudder in conjunction with pitch. This helps compensate for rotation of the helicopter caused by the increased
engine torque. (Never use revo. mixing with a heading-hold/AVCS gyro which is in heading hold/AVCS mode. However, revo.
mixing is still used when a heading-hold/AVCS gyro is in normal mode.)
To set the REVO mixing:
1. Enter the programming mode and use the MODE key to access the REVO function.
2. Push the DATA INPUT lever upward for 0.5 seconds. This will cause the flashing INH
display to change to a flashing ON display. Now the REVO function is on.
3. Push the SELECT key once. This will cause the flashing “%” symbol on the display. It can
set mixing amount on throttle stick hi side and low side separately. When you move the
throttle stick to the low side from neutral, the arrow indicates down direction. Then push up
or down DATA INPUT lever to set the mixing amount of the low side. When you move the
throttle stick to the high side from neutral, the arrow indicates up direction. Then push up or
down DATA INPUT lever to set the mixing amount of the low side.
5SEDWITHRUDDER
YAWAXIS
GYRO Gyro mixing function (HELI only)
GYROS : Using electronics to take some of the complexity out of setups and flight.
What is a gyro? A gyroscope is an electronic unit that senses rotational
movement and corrects for it. For example, if the wind blows your helicopter’s tail
to the left, a gyro will sense that motion (and confirm that no input was given)
and will correct for it.
How does it help in helicopter setup? A good gyro will totally eliminate the need
for revo. mixing. The gyro will sense and correct the unwanted motion for you, so
you don’ t have to spend time to get a complex curve operating properly.
Gyro sensor kinds: There are many different kinds of gyros. Early gyros were mechanical, with a spinning drum similar to a
child’s gyroscope toy. The next generation utilized a special type of crystal, called piezoelectric, which sensed the motion and
provided an electrical pulse. The finest gyros at the time of this writing are SMM technology. These silicone micro machines,
or computer chips, sense the motion. SMM is far more accurate and less susceptible to inaccuracies caused by temperature
changes, etc.
Choosing the right gyro for your skills, your helicopter, and your budget:
• Mechanical: some are still available. They are very challenging to set up and not as reliable as piezo or SMM.
• Non-Heading-Hold Piezo: these are now inexpensive gyros that are reliable and easy to set up. Some have dual rates and
remote gain control to adjust sensitivity in flight. Lack heading-hold capabilities for precision flying.
• Heading-Hold Piezo: Until recently, the cream of the crop. Expensive, and more complex to set up. Adds GPS-like heading
recognition. Exhibits minor difficulties with temperature drift (position setting varying with unit’s temperature).
• Heading-Hold SMM: 21st Century gyro technology. Computer chip technology. Expensive, easier set up, higher durability.
Significant decrease in temperature sensitivity. Many include frame rate settings to allow faster response when using
26

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Robbe Futaba T6EX bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Robbe Futaba T6EX in de taal/talen: Engels als bijlage per email.

De handleiding is 2,28 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info