520094
72
Verklein
Vergroot
Pagina terug
1/105
Pagina verder
Model menu
Spoilers
FX-40
18.8 SPOILER (FLAP) MIXER
This menu is
used for setting
up a mixer
which causes
all the wing
flaps to be
lower
ed to
incr
ease wing
camber and
thereby maxi-
mise lift.
The travels for
all the control
surfaces can be
set in the ‘up’ or
‘down’ direc-
tion, to ensure that the mixer can generate the optimum wing
geometry for all flight tasks. The servo travels and directions of
rotation can be set accurately using a mixer curve. It is also
possible to program a delay time, define the servo transit
speed and select a mixer trigger switch.
Mark the ‘Spoiler’ option in the Model menu. The screen now
looks like this:
The adjustment facilities are extremely comprehensive, but
they are arranged in just as logical a manner as all the other
menus described up to this point.
As you would expect, this mixer function first has to be activa-
ted in the Status line. Mark the field, and the same field then
displays ‘ON’ or ‘OFF’ instead of ‘INA’ (inactive), according to
the position of the switch.
The effects and method of setting the ‘Glob’ or ‘Sepa’ mode
have already been described; the function is programmed
using the appropriate switch field in the second line.
Use the familiar method to define a switch for triggering the
mixer: mark the appropriate field and define the switch and its
direction of operation in the switch select menu which now
appears. The default is ‘NONE’, i.e. the mixer is constantly
switched on.
You can program a delay time for each channel, so that there
is a smooth transition when you switch modes, rather than an
abrupt change. The first step here is to mark the ‘flight mode
delay’ line. You can now enter a setting using the arrow but-
tons. The adjustment range is 0 to 27 increments; the higher
the number, the longer the delay time. The maximum delay
time (27 increments) corresponds to a duration of nine
seconds. It is possible to assign a special switch which can be
used to turn the delay off for particular situations. This is effec-
ted by defining a switch in the bottom line.
In the second frame the AFR settings are entered for the cam-
ber-changing flap mixer. This sub-menu is accessed by mar-
king the ‘Spoiler AFR’ field; the screen display now looks like
this:
The AFR curve is programmed exactly as described in Section
17.2 on page 57.
The mixer curves can be set up and the servo travels entered
individually for the ailerons, the spoiler flaps, the brake flaps
and also for the elevators. Mark the appropriate line in the
separate ‘Curve and rate’ field. In each case a new display
appears in which you can program the mixer curve in the usual
manner, working separately for the left and right sides of the
curve. An ‘Offset’ and / or an ‘X-offset’ curve shift can be
implemented in the usual manner.
In a separate frame, the servo travels can be entered individu-
ally as percentage values, e.g. for all four aileron servos. In the
same display the servo transit speed can also be pro-
grammed. You can enter a speed separately for the ‘there’ and
‘back’ directions. The adjustment range is 0 to 27 increments.
Please note: the higher the number, the more slowly the servo
moves. The maximum value (27 increments) corresponds to a
duration of nine seconds. The arrow buttons are used to make
any adjustments. The default value is always ‘0’. Pressing the
‘Reset’ button restores the default setting.
The screen shows a typical display relating to this program-
ming procedure.
Finally, please note that the programming options and the
actual appearance of the screen display may vary slightly
according to the model type and wing type you have selected.
71
Tip aileron
(AIL3)
Main
aileron
(AIL)
Spoiler
(FLAP)
Spoiler
(FLAP2)
Brake flaps
(BRFL & BRFL2)
Main
aileron
(AIL2)
Tip
aileron
(AIL3)
V-tail Ailvator
ELE
ELE
ELE2
ELE2
72

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Robbe Futaba FX-40 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Robbe Futaba FX-40 in de taal/talen: Engels als bijlage per email.

De handleiding is 3,91 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Robbe Futaba FX-40

Robbe Futaba FX-40 Gebruiksaanwijzing - Deutsch - 105 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info