Handleiding Roadstar RCR-4950US (pagina 5 van 32) (Duits, Engels, Frans, Italiaans, Portugees, Spaans)

471589

Verklein

Vergroot

Pagina terug

1/32

Pagina verder

EnglishEnglish

Starting disc play from the beginning of a particular track

• Press the Forward or Reverse Skip Track Buttons (15/23) to select the desired track.

The number of the selected track will be shown on the CD display. Press the Play/

Pause Button (22) to start play.

To skip to the next track

1. To skip to the beginning of next track 5 while track 4 is playing.

2. Press the Skip Forward Skip Track Button once to skip to the beginning of next track.

Continuously pressing the Forward Skip Track Button until the desired trade is reached.

Once the beginning of the last track is reached the CD player will not advance any

further.

To skip back to the previous track on a disc

1. To skip back to the beginning of current track. Press the skip Backward once.

2 Toskip back to the beginning of previous track.

Press the skip backward Skip Track Button twice.

Continuously pressing the Reverse Skip Track Button makes the CD player skip back

through the disc track by track. Once the beginning of the first track is reached, the CD player

will not go back any further.

Manual Search

• During playback, pressing the Forward or Reverse Skip / Search buttons will cause the

player to scan through the current track. At the end of a track the player will skip to the

next track and continue scanning. At the beginning of a track the player will skip to the

previous track and continue scanning.

• When the player reaches the end of the final track, or the beginning of the first track, it will

stop scanning.

RANDOM DISC PLAY (CD/USB/SD)

1. Press the PLAY/PAUSE button (22) and after press the MODE button (29) 3 times to

enter the Random mode. “RANDOM” appears on the display, then press PLAY/PAUSE

button (22) to start playback in Random order.

2. Press SKIP UP button (15) to go to next Random track.

REPEAT DISC PLAY (CD/USB/SD)

For repeat play of one track

clean compact discs. These chemicals can irreparably damage the disc’s surface.

• Discs should be returned to their cases after use. This avoids serious scratches that

could cause the Laser pickup to skip.

• Do not expose discs to direct sunlight, high humidity, or high temperatures for extended

periods. Long exposure to high temperatures can warp the disc.

• Do not stick paper or write anything with a ballpoint pen on the label side of the disc.

CD/USB/SD -MP3 OPERATION

Loading and Unloading Compact Discs

1. Set the Function Selector (3) to the CD/MP3 Position.

2. Open the disc compartment’s door.

3. When the door has opened, remove a disc from its case and place it carefully in the

compartment with the label side facing up. Locate 3” discs, on the central spindle in the

compartment.

4. Close the door by pressing on the center of the disc compartment door.

PLAY BACK

1. Load a CD into the disc compartment, and close the compartment. The total number of

tracks appears on the display

2. Press the Play/Pause button (22). The disc play will begin from the start of the first track

of the disc.

3. At the end of the disc, the unit will switch to stop mode and the play indicator will go out.

Notes: If the disc is deeply scratched, or too dirty, disc play may not start.

If an improperly centred disc is played, noise can be heard in the mechanism. The

use of such discs should be avoided.

IMPORTANT INFORMATION

This compact disc player has built-in error compensation circuits to correct for minor defects

in a disc. There are limits, however, to the amount of correction available.

In some cases the CD player may skip some tracks on a disc during disc play. This problem

may be caused by defects (such as scratches) on the disc being played, which are too large

for the error compensation circuits to handle.

4. To stop CD play. Press the Stop Button (21). Disc play will stop, the Play indicator will go

off, and the display will show the total number of tracks on the CD.

5. To temporarily stop disc play (pause mode), press the Pause Button (22). Disc play will

stop at the current play position. The Play indication will begin to flash.

6. To resume disc play, press the Play Button again.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

lees eerst de handleiding door;
controleer of uw vraag al eerder door iemand anders is gesteld;
probeer uw vraag zo duidelijk mogelijk te stellen;
heeft u een probleem en al geprobeerd om dit op te lossen, vermeld dit erbij aub;
heeft u een oplossing gekregen van een bezoeker dan horen wij dat graag in dit forum;
wilt u een reactie geven op een vraag of antwoord, gebruik dan niet dit formulier maar klik op de knop 'reageer op deze vraag';
uw vraag wordt direct op de website gezet; vermijd daarom persoonlijke gegevens in te vullen;

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Roadstar RCR-4950US Handleiding

Hulp nodig? Stel uw vraag in het forum

Misbruik melden

Product:

Spelregels forum

Abonneren

Ontvang uw handleiding per email

Stel vragen via chat aan uw handleiding

Uw handleiding is per email verstuurd. Controleer uw email

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

U heeft geen emailadres opgegeven

Uw vraag is op deze pagina toegevoegd

Info