3.4.2 Select User
Press and hold <USER> for 3 seconds to change the current USER, the selected “USER A” or
“USER B” will show on display for 5 seconds.
Each user arranged 32 memories (User A and memory1 preset in factory)
3.4.3 Recall radio preset memory
There are 4 preset key for store radio station and cooking timer.
When the radio is ON, press <MEM. /User> once. ‘MEM’ goes solid; the frequency of the memory-1
goes solid in the LCD.
Press <Preset +>, <Preset -> to select the desired preset memory station.
When new preset memory key is pressed, MUTE is active. When keying the preset memory has
been released for 1 second, the selection of preset memory is considered as valid and the
radio will be tuned to that frequency immediately with MUTE idle.
At any time, press other key to start its corresponding function. ( When Radio is OFF, same
operation for cooking timer memories recall )
3.4.4 Store into memory
To store the tuning frequency of radio station being received into any of the preset memory, press
<MEM > once. The ‘MEM’ goes flashing
Select the desired memory station and page by pressing the corresponding key until its number
goes solid above ‘MEM’
Press <MEM> again to confirm the process of storing. Then, ‘MEM’ goes solid.
When ‘MEMORY’ is flashing, pressing <Up> or < Down> will start turning and exit memory store
Press other key to start its corresponding function.
When Radio is OFF, same operation for cooking timer memories store.
3.4.5 Search Up/Down:
When the radio is ON, press <UP> once to change the receiving frequency up by 1 step
Press <DOWN> once to change the receiving frequency down by 1 step.
Press and hold <UP> to search the next radio station by moving the receiving frequency up.
Press and hold <DOWN> to search the next radio station by moving the receiving frequency down.
3.4.6 Using of A.M.S. (Auto Memory Store)
When radio is on.
Press and hold < MEM> for 3 seconds to active AMS mode.
In this mode, the radio will automatically scan the radio station and store the station that had been
scanned until scan up all the frequency or stored all the memory station, it will exit automatically.
When AMS function active, the stored memories will replace by the new scanned radio station.
3.5 Using CD:
3.5.1 start the CD
Press <Power> once to turn on the unit
Press <FUNC/User> key to select CD/MP3
Press <Power> again to turn off the unit
3.5.2 Using CD Player
Press <Open> to open tray of CD and put CD media to tray, press “Open/Close” key again to close
door of CD tray, at the moment , device will catch data from CD and “Reading, Please wait “
for about 5-10 seconds
Once the CD read and confirm it’s workable format, device will play from beginning of play list if not
any key press.
Press “Play/pause” to play of Pause under music play back
Press “Prog./Mem” to select play back mode as intro ,random or repeat
Press and hold “UP | FF” to fast speed forward, press once to next track
Press and hold “ Down | RW” to Fast speed rewind , press once back to previously track.
